delete src/mesh/assimp-master

1 files changed, 0 insertions, 199 deletions

diff --git a/src/mesh/assimp-master/contrib/gtest/samples/sample5_unittest.cc b/src/mesh/assimp-master/contrib/gtest/samples/sample5_unittest.cc
deleted file mode 100644
index 43d8e57..0000000
--- a/src/mesh/assimp-master/contrib/gtest/samples/sample5_unittest.cc
+++ /dev/null
@@ -1,199 +0,0 @@
-// Copyright 2005, Google Inc.
-// All rights reserved.
-//
-// Redistribution and use in source and binary forms, with or without
-// modification, are permitted provided that the following conditions are
-// met:
-//
-//     * Redistributions of source code must retain the above copyright
-// notice, this list of conditions and the following disclaimer.
-//     * Redistributions in binary form must reproduce the above
-// copyright notice, this list of conditions and the following disclaimer
-// in the documentation and/or other materials provided with the
-// distribution.
-//     * Neither the name of Google Inc. nor the names of its
-// contributors may be used to endorse or promote products derived from
-// this software without specific prior written permission.
-//
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-//
-// Author: wan@google.com (Zhanyong Wan)
-
-// This sample teaches how to reuse a test fixture in multiple test
-// cases by deriving sub-fixtures from it.
-//
-// When you define a test fixture, you specify the name of the test
-// case that will use this fixture.  Therefore, a test fixture can
-// be used by only one test case.
-//
-// Sometimes, more than one test cases may want to use the same or
-// slightly different test fixtures.  For example, you may want to
-// make sure that all tests for a GUI library don't leak important
-// system resources like fonts and brushes.  In Google Test, you do
-// this by putting the shared logic in a super (as in "super class")
-// test fixture, and then have each test case use a fixture derived
-// from this super fixture.
-
-#include <limits.h>
-#include <time.h>
-#include "sample3-inl.h"
-#include "gtest/gtest.h"
-#include "sample1.h"
-
-// In this sample, we want to ensure that every test finishes within
-// ~5 seconds.  If a test takes longer to run, we consider it a
-// failure.
-//
-// We put the code for timing a test in a test fixture called
-// "QuickTest".  QuickTest is intended to be the super fixture that
-// other fixtures derive from, therefore there is no test case with
-// the name "QuickTest".  This is OK.
-//
-// Later, we will derive multiple test fixtures from QuickTest.
-class QuickTest : public testing::Test {
- protected:
-  // Remember that SetUp() is run immediately before a test starts.
-  // This is a good place to record the start time.
-  virtual void SetUp() {
-    start_time_ = time(NULL);
-  }
-
-  // TearDown() is invoked immediately after a test finishes.  Here we
-  // check if the test was too slow.
-  virtual void TearDown() {
-    // Gets the time when the test finishes
-    const time_t end_time = time(NULL);
-
-    // Asserts that the test took no more than ~5 seconds.  Did you
-    // know that you can use assertions in SetUp() and TearDown() as
-    // well?
-    EXPECT_TRUE(end_time - start_time_ <= 5) << "The test took too long.";
-  }
-
-  // The UTC time (in seconds) when the test starts
-  time_t start_time_;
-};
-
-
-// We derive a fixture named IntegerFunctionTest from the QuickTest
-// fixture.  All tests using this fixture will be automatically
-// required to be quick.
-class IntegerFunctionTest : public QuickTest {
-  // We don't need any more logic than already in the QuickTest fixture.
-  // Therefore the body is empty.
-};
-
-
-// Now we can write tests in the IntegerFunctionTest test case.
-
-// Tests Factorial()
-TEST_F(IntegerFunctionTest, Factorial) {
-  // Tests factorial of negative numbers.
-  EXPECT_EQ(1, Factorial(-5));
-  EXPECT_EQ(1, Factorial(-1));
-  EXPECT_GT(Factorial(-10), 0);
-
-  // Tests factorial of 0.
-  EXPECT_EQ(1, Factorial(0));
-
-  // Tests factorial of positive numbers.
-  EXPECT_EQ(1, Factorial(1));
-  EXPECT_EQ(2, Factorial(2));
-  EXPECT_EQ(6, Factorial(3));
-  EXPECT_EQ(40320, Factorial(8));
-}
-
-
-// Tests IsPrime()
-TEST_F(IntegerFunctionTest, IsPrime) {
-  // Tests negative input.
-  EXPECT_FALSE(IsPrime(-1));
-  EXPECT_FALSE(IsPrime(-2));
-  EXPECT_FALSE(IsPrime(INT_MIN));
-
-  // Tests some trivial cases.
-  EXPECT_FALSE(IsPrime(0));
-  EXPECT_FALSE(IsPrime(1));
-  EXPECT_TRUE(IsPrime(2));
-  EXPECT_TRUE(IsPrime(3));
-
-  // Tests positive input.
-  EXPECT_FALSE(IsPrime(4));
-  EXPECT_TRUE(IsPrime(5));
-  EXPECT_FALSE(IsPrime(6));
-  EXPECT_TRUE(IsPrime(23));
-}
-
-
-// The next test case (named "QueueTest") also needs to be quick, so
-// we derive another fixture from QuickTest.
-//
-// The QueueTest test fixture has some logic and shared objects in
-// addition to what's in QuickTest already.  We define the additional
-// stuff inside the body of the test fixture, as usual.
-class QueueTest : public QuickTest {
- protected:
-  virtual void SetUp() {
-    // First, we need to set up the super fixture (QuickTest).
-    QuickTest::SetUp();
-
-    // Second, some additional setup for this fixture.
-    q1_.Enqueue(1);
-    q2_.Enqueue(2);
-    q2_.Enqueue(3);
-  }
-
-  // By default, TearDown() inherits the behavior of
-  // QuickTest::TearDown().  As we have no additional cleaning work
-  // for QueueTest, we omit it here.
-  //
-  // virtual void TearDown() {
-  //   QuickTest::TearDown();
-  // }
-
-  Queue<int> q0_;
-  Queue<int> q1_;
-  Queue<int> q2_;
-};
-
-
-// Now, let's write tests using the QueueTest fixture.
-
-// Tests the default constructor.
-TEST_F(QueueTest, DefaultConstructor) {
-  EXPECT_EQ(0u, q0_.Size());
-}
-
-// Tests Dequeue().
-TEST_F(QueueTest, Dequeue) {
-  int* n = q0_.Dequeue();
-  EXPECT_TRUE(n == NULL);
-
-  n = q1_.Dequeue();
-  EXPECT_TRUE(n != NULL);
-  EXPECT_EQ(1, *n);
-  EXPECT_EQ(0u, q1_.Size());
-  delete n;
-
-  n = q2_.Dequeue();
-  EXPECT_TRUE(n != NULL);
-  EXPECT_EQ(2, *n);
-  EXPECT_EQ(1u, q2_.Size());
-  delete n;
-}
-
-// If necessary, you can derive further test fixtures from a derived
-// fixture itself.  For example, you can derive another fixture from
-// QueueTest.  Google Test imposes no limit on how deep the hierarchy
-// can be.  In practice, however, you probably don't want it to be too
-// deep as to be confusing.