delete src/mesh/assimp-master

1 files changed, 0 insertions, 1129 deletions

diff --git a/src/mesh/assimp-master/include/assimp/config.h.in b/src/mesh/assimp-master/include/assimp/config.h.in
deleted file mode 100644
index bf00765..0000000
--- a/src/mesh/assimp-master/include/assimp/config.h.in
+++ /dev/null
@@ -1,1129 +0,0 @@
-/*
----------------------------------------------------------------------------
-Open Asset Import Library (assimp)
----------------------------------------------------------------------------
-
-Copyright (c) 2006-2020, assimp team
-
-
-All rights reserved.
-
-Redistribution and use of this software in source and binary forms,
-with or without modification, are permitted provided that the following
-conditions are met:
-
-* Redistributions of source code must retain the above
-  copyright notice, this list of conditions and the
-  following disclaimer.
-
-* Redistributions in binary form must reproduce the above
-  copyright notice, this list of conditions and the
-  following disclaimer in the documentation and/or other
-  materials provided with the distribution.
-
-* Neither the name of the assimp team, nor the names of its
-  contributors may be used to endorse or promote products
-  derived from this software without specific prior
-  written permission of the assimp team.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
----------------------------------------------------------------------------
-*/
-
-/** @file config.h
- *  @brief Defines constants for configurable properties for the library
- *
- *  Typically these properties are set via
- *  #Assimp::Importer::SetPropertyFloat,
- *  #Assimp::Importer::SetPropertyInteger or
- *  #Assimp::Importer::SetPropertyString,
- *  depending on the data type of a property. All properties have a
- *  default value. See the doc for the mentioned methods for more details.
- *
- *  <br><br>
- *  The corresponding functions for use with the plain-c API are:
- *  #aiSetImportPropertyInteger,
- *  #aiSetImportPropertyFloat,
- *  #aiSetImportPropertyString
- */
-#pragma once
-#ifndef AI_CONFIG_H_INC
-#define AI_CONFIG_H_INC
-
-
-// ###########################################################################
-// LIBRARY SETTINGS
-// General, global settings
-// ###########################################################################
-
-// ---------------------------------------------------------------------------
-/** @brief Enables time measurements.
- *
- *  If enabled, measures the time needed for each part of the loading
- *  process (i.e. IO time, importing, postprocessing, ..) and dumps
- *  these timings to the DefaultLogger. See the @link perf Performance
- *  Page@endlink for more information on this topic.
- *
- * Property type: bool. Default value: false.
- */
-#define AI_CONFIG_GLOB_MEASURE_TIME  \
-    "GLOB_MEASURE_TIME"
-
-
-// ---------------------------------------------------------------------------
-/** @brief Global setting to disable generation of skeleton dummy meshes
- *
- * Skeleton dummy meshes are generated as a visualization aid in cases which
- * the input data contains no geometry, but only animation data.
- * Property data type: bool. Default value: false
- */
-// ---------------------------------------------------------------------------
-#define AI_CONFIG_IMPORT_NO_SKELETON_MESHES \
-    "IMPORT_NO_SKELETON_MESHES"
-
-
-
-# if 0 // not implemented yet
-// ---------------------------------------------------------------------------
-/** @brief Set Assimp's multithreading policy.
- *
- * This setting is ignored if Assimp was built without boost.thread
- * support (ASSIMP_BUILD_NO_THREADING, which is implied by ASSIMP_BUILD_BOOST_WORKAROUND).
- * Possible values are: -1 to let Assimp decide what to do, 0 to disable
- * multithreading entirely and any number larger than 0 to force a specific
- * number of threads. Assimp is always free to ignore this settings, which is
- * merely a hint. Usually, the default value (-1) will be fine. However, if
- * Assimp is used concurrently from multiple user threads, it might be useful
- * to limit each Importer instance to a specific number of cores.
- *
- * For more information, see the @link threading Threading page@endlink.
- * Property type: int, default value: -1.
- */
-#define AI_CONFIG_GLOB_MULTITHREADING  \
-    "GLOB_MULTITHREADING"
-#endif
-
-// ###########################################################################
-// POST PROCESSING SETTINGS
-// Various stuff to fine-tune the behavior of a specific post processing step.
-// ###########################################################################
-
-
-// ---------------------------------------------------------------------------
-/** @brief Maximum bone count per mesh for the SplitbyBoneCount step.
- *
- * Meshes are split until the maximum number of bones is reached. The default
- * value is AI_SBBC_DEFAULT_MAX_BONES, which may be altered at
- * compile-time.
- * Property data type: integer.
- */
-// ---------------------------------------------------------------------------
-#define AI_CONFIG_PP_SBBC_MAX_BONES \
-    "PP_SBBC_MAX_BONES"
-
-
-// default limit for bone count
-#if (!defined AI_SBBC_DEFAULT_MAX_BONES)
-#   define AI_SBBC_DEFAULT_MAX_BONES        60
-#endif
-
-
-// ---------------------------------------------------------------------------
-/** @brief  Specifies the maximum angle that may be between two vertex tangents
- *         that their tangents and bi-tangents are smoothed.
- *
- * This applies to the CalcTangentSpace-Step. The angle is specified
- * in degrees. The maximum value is 175.
- * Property type: float. Default value: 45 degrees
- */
-#define AI_CONFIG_PP_CT_MAX_SMOOTHING_ANGLE \
-    "PP_CT_MAX_SMOOTHING_ANGLE"
-
-// ---------------------------------------------------------------------------
-/** @brief Source UV channel for tangent space computation.
- *
- * The specified channel must exist or an error will be raised.
- * Property type: integer. Default value: 0
- */
-// ---------------------------------------------------------------------------
-#define AI_CONFIG_PP_CT_TEXTURE_CHANNEL_INDEX \
-    "PP_CT_TEXTURE_CHANNEL_INDEX"
-
-// ---------------------------------------------------------------------------
-/** @brief  Specifies the maximum angle that may be between two face normals
- *          at the same vertex position that their are smoothed together.
- *
- * Sometimes referred to as 'crease angle'.
- * This applies to the GenSmoothNormals-Step. The angle is specified
- * in degrees, so 180 is PI. The default value is 175 degrees (all vertex
- * normals are smoothed). The maximum value is 175, too. Property type: float.
- * Warning: setting this option may cause a severe loss of performance. The
- * performance is unaffected if the #AI_CONFIG_FAVOUR_SPEED flag is set but
- * the output quality may be reduced.
- */
-#define AI_CONFIG_PP_GSN_MAX_SMOOTHING_ANGLE \
-    "PP_GSN_MAX_SMOOTHING_ANGLE"
-
-
-// ---------------------------------------------------------------------------
-/** @brief Sets the colormap (= palette) to be used to decode embedded
- *         textures in MDL (Quake or 3DGS) files.
- *
- * This must be a valid path to a file. The file is 768 (256*3) bytes
- * large and contains RGB triplets for each of the 256 palette entries.
- * The default value is colormap.lmp. If the file is not found,
- * a default palette (from Quake 1) is used.
- * Property type: string.
- */
-#define AI_CONFIG_IMPORT_MDL_COLORMAP       \
-    "IMPORT_MDL_COLORMAP"
-
-// ---------------------------------------------------------------------------
-/** @brief Configures the #aiProcess_RemoveRedundantMaterials step to
- *  keep materials matching a name in a given list.
- *
- * This is a list of 1 to n strings, ' ' serves as delimiter character.
- * Identifiers containing whitespaces must be enclosed in *single*
- * quotation marks. For example:<tt>
- * "keep-me and_me_to anotherMaterialToBeKept \'name with whitespace\'"</tt>.
- * If a material matches on of these names, it will not be modified or
- * removed by the postprocessing step nor will other materials be replaced
- * by a reference to it. <br>
- * This option might be useful if you are using some magic material names
- * to pass additional semantics through the content pipeline. This ensures
- * they won't be optimized away, but a general optimization is still
- * performed for materials not contained in the list.
- * Property type: String. Default value: n/a
- * @note Linefeeds, tabs or carriage returns are treated as whitespace.
- *   Material names are case sensitive.
- */
-#define AI_CONFIG_PP_RRM_EXCLUDE_LIST   \
-    "PP_RRM_EXCLUDE_LIST"
-
-// ---------------------------------------------------------------------------
-/** @brief Configures the #aiProcess_PreTransformVertices step to
- *  keep the scene hierarchy. Meshes are moved to worldspace, but
- *  no optimization is performed (read: meshes with equal materials are not
- *  joined. The total number of meshes won't change).
- *
- * This option could be of use for you if the scene hierarchy contains
- * important additional information which you intend to parse.
- * For rendering, you can still render all meshes in the scene without
- * any transformations.
- * Property type: bool. Default value: false.
- */
-#define AI_CONFIG_PP_PTV_KEEP_HIERARCHY     \
-    "PP_PTV_KEEP_HIERARCHY"
-
-// ---------------------------------------------------------------------------
-/** @brief Configures the #aiProcess_PreTransformVertices step to normalize
- *  all vertex components into the [-1,1] range. That is, a bounding box
- *  for the whole scene is computed, the maximum component is taken and all
- *  meshes are scaled appropriately (uniformly of course!).
- *  This might be useful if you don't know the spatial dimension of the input
- *  data*/
-#define AI_CONFIG_PP_PTV_NORMALIZE  \
-    "PP_PTV_NORMALIZE"
-
-// ---------------------------------------------------------------------------
-/** @brief Configures the #aiProcess_PreTransformVertices step to use
- *  a users defined matrix as the scene root node transformation before
- *  transforming vertices.
- *  Property type: bool. Default value: false.
- */
-#define AI_CONFIG_PP_PTV_ADD_ROOT_TRANSFORMATION    \
-    "PP_PTV_ADD_ROOT_TRANSFORMATION"
-
-// ---------------------------------------------------------------------------
-/** @brief Configures the #aiProcess_PreTransformVertices step to use
- *  a users defined matrix as the scene root node transformation before
- *  transforming vertices. This property correspond to the 'a1' component
- *  of the transformation matrix.
- *  Property type: aiMatrix4x4.
- */
-#define AI_CONFIG_PP_PTV_ROOT_TRANSFORMATION    \
-    "PP_PTV_ROOT_TRANSFORMATION"
-
-// ---------------------------------------------------------------------------
-/** @brief Configures the #aiProcess_FindDegenerates step to
- *  remove degenerated primitives from the import - immediately.
- *
- * The default behaviour converts degenerated triangles to lines and
- * degenerated lines to points. See the documentation to the
- * #aiProcess_FindDegenerates step for a detailed example of the various ways
- * to get rid of these lines and points if you don't want them.
- * Property type: bool. Default value: false.
- */
-#define AI_CONFIG_PP_FD_REMOVE \
-    "PP_FD_REMOVE"
-
-// ---------------------------------------------------------------------------
-/**
- *  @brief  Configures the #aiProcess_FindDegenerates to check the area of a
- *  trinagle to be greates than e-6. If this is not the case the triangle will
- *  be removed if #AI_CONFIG_PP_FD_REMOVE is set to true.
- */
-#define AI_CONFIG_PP_FD_CHECKAREA \
-    "PP_FD_CHECKAREA"
-
-// ---------------------------------------------------------------------------
-/** @brief Configures the #aiProcess_OptimizeGraph step to preserve nodes
- * matching a name in a given list.
- *
- * This is a list of 1 to n strings, ' ' serves as delimiter character.
- * Identifiers containing whitespaces must be enclosed in *single*
- * quotation marks. For example:<tt>
- * "keep-me and_me_to anotherNodeToBeKept \'name with whitespace\'"</tt>.
- * If a node matches on of these names, it will not be modified or
- * removed by the postprocessing step.<br>
- * This option might be useful if you are using some magic node names
- * to pass additional semantics through the content pipeline. This ensures
- * they won't be optimized away, but a general optimization is still
- * performed for nodes not contained in the list.
- * Property type: String. Default value: n/a
- * @note Linefeeds, tabs or carriage returns are treated as whitespace.
- *   Node names are case sensitive.
- */
-#define AI_CONFIG_PP_OG_EXCLUDE_LIST    \
-    "PP_OG_EXCLUDE_LIST"
-
-// ---------------------------------------------------------------------------
-/** @brief  Set the maximum number of triangles in a mesh.
- *
- * This is used by the "SplitLargeMeshes" PostProcess-Step to determine
- * whether a mesh must be split or not.
- * @note The default value is AI_SLM_DEFAULT_MAX_TRIANGLES
- * Property type: integer.
- */
-#define AI_CONFIG_PP_SLM_TRIANGLE_LIMIT \
-    "PP_SLM_TRIANGLE_LIMIT"
-
-// default value for AI_CONFIG_PP_SLM_TRIANGLE_LIMIT
-#if (!defined AI_SLM_DEFAULT_MAX_TRIANGLES)
-#   define AI_SLM_DEFAULT_MAX_TRIANGLES     1000000
-#endif
-
-// ---------------------------------------------------------------------------
-/** @brief  Set the maximum number of vertices in a mesh.
- *
- * This is used by the "SplitLargeMeshes" PostProcess-Step to determine
- * whether a mesh must be split or not.
- * @note The default value is AI_SLM_DEFAULT_MAX_VERTICES
- * Property type: integer.
- */
-#define AI_CONFIG_PP_SLM_VERTEX_LIMIT \
-    "PP_SLM_VERTEX_LIMIT"
-
-// default value for AI_CONFIG_PP_SLM_VERTEX_LIMIT
-#if (!defined AI_SLM_DEFAULT_MAX_VERTICES)
-#   define AI_SLM_DEFAULT_MAX_VERTICES      1000000
-#endif
-
-// ---------------------------------------------------------------------------
-/** @brief Set the maximum number of bones affecting a single vertex
- *
- * This is used by the #aiProcess_LimitBoneWeights PostProcess-Step.
- * @note The default value is AI_LMW_MAX_WEIGHTS
- * Property type: integer.*/
-#define AI_CONFIG_PP_LBW_MAX_WEIGHTS    \
-    "PP_LBW_MAX_WEIGHTS"
-
-// default value for AI_CONFIG_PP_LBW_MAX_WEIGHTS
-#if (!defined AI_LMW_MAX_WEIGHTS)
-#   define AI_LMW_MAX_WEIGHTS   0x4
-#endif // !! AI_LMW_MAX_WEIGHTS
-
-// ---------------------------------------------------------------------------
-/** @brief Lower the deboning threshold in order to remove more bones.
- *
- * This is used by the #aiProcess_Debone PostProcess-Step.
- * @note The default value is AI_DEBONE_THRESHOLD
- * Property type: float.*/
-#define AI_CONFIG_PP_DB_THRESHOLD \
-    "PP_DB_THRESHOLD"
-
-// default value for AI_CONFIG_PP_LBW_MAX_WEIGHTS
-#if (!defined AI_DEBONE_THRESHOLD)
-#   define AI_DEBONE_THRESHOLD  1.0f
-#endif // !! AI_DEBONE_THRESHOLD
-
-// ---------------------------------------------------------------------------
-/** @brief Require all bones qualify for deboning before removing any
- *
- * This is used by the #aiProcess_Debone PostProcess-Step.
- * @note The default value is 0
- * Property type: bool.*/
-#define AI_CONFIG_PP_DB_ALL_OR_NONE \
-    "PP_DB_ALL_OR_NONE"
-
-/** @brief Default value for the #AI_CONFIG_PP_ICL_PTCACHE_SIZE property
- */
-#ifndef PP_ICL_PTCACHE_SIZE
-#   define PP_ICL_PTCACHE_SIZE 12
-#endif
-
-// ---------------------------------------------------------------------------
-/** @brief Set the size of the post-transform vertex cache to optimize the
- *    vertices for. This configures the #aiProcess_ImproveCacheLocality step.
- *
- * The size is given in vertices. Of course you can't know how the vertex
- * format will exactly look like after the import returns, but you can still
- * guess what your meshes will probably have.
- * @note The default value is #PP_ICL_PTCACHE_SIZE. That results in slight
- * performance improvements for most nVidia/AMD cards since 2002.
- * Property type: integer.
- */
-#define AI_CONFIG_PP_ICL_PTCACHE_SIZE   "PP_ICL_PTCACHE_SIZE"
-
-// ---------------------------------------------------------------------------
-/** @brief Enumerates components of the aiScene and aiMesh data structures
- *  that can be excluded from the import using the #aiProcess_RemoveComponent step.
- *
- *  See the documentation to #aiProcess_RemoveComponent for more details.
- */
-enum aiComponent
-{
-    /** Normal vectors */
-#ifdef SWIG
-    aiComponent_NORMALS = 0x2,
-#else
-    aiComponent_NORMALS = 0x2u,
-#endif
-
-    /** Tangents and bitangents go always together ... */
-#ifdef SWIG
-    aiComponent_TANGENTS_AND_BITANGENTS = 0x4,
-#else
-    aiComponent_TANGENTS_AND_BITANGENTS = 0x4u,
-#endif
-
-    /** ALL color sets
-     * Use aiComponent_COLORn(N) to specify the N'th set */
-    aiComponent_COLORS = 0x8,
-
-    /** ALL texture UV sets
-     * aiComponent_TEXCOORDn(N) to specify the N'th set  */
-    aiComponent_TEXCOORDS = 0x10,
-
-    /** Removes all bone weights from all meshes.
-     * The scenegraph nodes corresponding to the bones are NOT removed.
-     * use the #aiProcess_OptimizeGraph step to do this */
-    aiComponent_BONEWEIGHTS = 0x20,
-
-    /** Removes all node animations (aiScene::mAnimations).
-     * The corresponding scenegraph nodes are NOT removed.
-     * use the #aiProcess_OptimizeGraph step to do this */
-    aiComponent_ANIMATIONS = 0x40,
-
-    /** Removes all embedded textures (aiScene::mTextures) */
-    aiComponent_TEXTURES = 0x80,
-
-    /** Removes all light sources (aiScene::mLights).
-     * The corresponding scenegraph nodes are NOT removed.
-     * use the #aiProcess_OptimizeGraph step to do this */
-    aiComponent_LIGHTS = 0x100,
-
-    /** Removes all cameras (aiScene::mCameras).
-     * The corresponding scenegraph nodes are NOT removed.
-     * use the #aiProcess_OptimizeGraph step to do this */
-    aiComponent_CAMERAS = 0x200,
-
-    /** Removes all meshes (aiScene::mMeshes). */
-    aiComponent_MESHES = 0x400,
-
-    /** Removes all materials. One default material will
-     * be generated, so aiScene::mNumMaterials will be 1. */
-    aiComponent_MATERIALS = 0x800,
-
-
-    /** This value is not used. It is just there to force the
-     *  compiler to map this enum to a 32 Bit integer. */
-#ifndef SWIG
-    _aiComponent_Force32Bit = 0x9fffffff
-#endif
-};
-
-// Remove a specific color channel 'n'
-#define aiComponent_COLORSn(n) (1u << (n+20u))
-
-// Remove a specific UV channel 'n'
-#define aiComponent_TEXCOORDSn(n) (1u << (n+25u))
-
-// ---------------------------------------------------------------------------
-/** @brief Input parameter to the #aiProcess_RemoveComponent step:
- *  Specifies the parts of the data structure to be removed.
- *
- * See the documentation to this step for further details. The property
- * is expected to be an integer, a bitwise combination of the
- * #aiComponent flags defined above in this header. The default
- * value is 0. Important: if no valid mesh is remaining after the
- * step has been executed (e.g you thought it was funny to specify ALL
- * of the flags defined above) the import FAILS. Mainly because there is
- * no data to work on anymore ...
- */
-#define AI_CONFIG_PP_RVC_FLAGS              \
-    "PP_RVC_FLAGS"
-
-// ---------------------------------------------------------------------------
-/** @brief Input parameter to the #aiProcess_SortByPType step:
- *  Specifies which primitive types are removed by the step.
- *
- *  This is a bitwise combination of the aiPrimitiveType flags.
- *  Specifying all of them is illegal, of course. A typical use would
- *  be to exclude all line and point meshes from the import. This
- *  is an integer property, its default value is 0.
- */
-#define AI_CONFIG_PP_SBP_REMOVE             \
-    "PP_SBP_REMOVE"
-
-// ---------------------------------------------------------------------------
-/** @brief Input parameter to the #aiProcess_FindInvalidData step:
- *  Specifies the floating-point accuracy for animation values. The step
- *  checks for animation tracks where all frame values are absolutely equal
- *  and removes them. This tweakable controls the epsilon for floating-point
- *  comparisons - two keys are considered equal if the invariant
- *  abs(n0-n1)>epsilon holds true for all vector respectively quaternion
- *  components. The default value is 0.f - comparisons are exact then.
- */
-#define AI_CONFIG_PP_FID_ANIM_ACCURACY              \
-    "PP_FID_ANIM_ACCURACY"
-
-// ---------------------------------------------------------------------------
-/** @brief Input parameter to the #aiProcess_FindInvalidData step:
- *  Set to true to ignore texture coordinates. This may be useful if you have
- *  to assign different kind of textures like one for the summer or one for the winter.
- */
-#define AI_CONFIG_PP_FID_IGNORE_TEXTURECOORDS        \
-    "PP_FID_IGNORE_TEXTURECOORDS"
-
-// TransformUVCoords evaluates UV scalings
-#define AI_UVTRAFO_SCALING 0x1
-
-// TransformUVCoords evaluates UV rotations
-#define AI_UVTRAFO_ROTATION 0x2
-
-// TransformUVCoords evaluates UV translation
-#define AI_UVTRAFO_TRANSLATION 0x4
-
-// Everything baked together -> default value
-#define AI_UVTRAFO_ALL (AI_UVTRAFO_SCALING | AI_UVTRAFO_ROTATION | AI_UVTRAFO_TRANSLATION)
-
-// ---------------------------------------------------------------------------
-/** @brief Input parameter to the #aiProcess_TransformUVCoords step:
- *  Specifies which UV transformations are evaluated.
- *
- *  This is a bitwise combination of the AI_UVTRAFO_XXX flags (integer
- *  property, of course). By default all transformations are enabled
- * (AI_UVTRAFO_ALL).
- */
-#define AI_CONFIG_PP_TUV_EVALUATE               \
-    "PP_TUV_EVALUATE"
-
-// ---------------------------------------------------------------------------
-/** @brief A hint to assimp to favour speed against import quality.
- *
- * Enabling this option may result in faster loading, but it needn't.
- * It represents just a hint to loaders and post-processing steps to use
- * faster code paths, if possible.
- * This property is expected to be an integer, != 0 stands for true.
- * The default value is 0.
- */
-#define AI_CONFIG_FAVOUR_SPEED              \
- "FAVOUR_SPEED"
-
-
-// ###########################################################################
-// IMPORTER SETTINGS
-// Various stuff to fine-tune the behaviour of specific importer plugins.
-// ###########################################################################
-
-// ---------------------------------------------------------------------------
-/** @brief Importers which parse JSON may use this to obtain a pointer to a
- * rapidjson::IRemoteSchemaDocumentProvider.
- *
- * The default value is nullptr
- * Property type: void*
- */
-#define AI_CONFIG_IMPORT_SCHEMA_DOCUMENT_PROVIDER \
-    "IMPORT_SCHEMA_DOCUMENT_PROVIDER"
-
-// ---------------------------------------------------------------------------
-/** @brief Set whether the fbx importer will merge all geometry layers present
- *    in the source file or take only the first.
- *
- * The default value is true (1)
- * Property type: bool
- */
-#define AI_CONFIG_IMPORT_FBX_READ_ALL_GEOMETRY_LAYERS \
-    "IMPORT_FBX_READ_ALL_GEOMETRY_LAYERS"
-
-// ---------------------------------------------------------------------------
-/** @brief Set whether the fbx importer will read all materials present in the
- *    source file or take only the referenced materials.
- *
- * This is void unless IMPORT_FBX_READ_MATERIALS=1.
- *
- * The default value is false (0)
- * Property type: bool
- */
-#define AI_CONFIG_IMPORT_FBX_READ_ALL_MATERIALS \
-    "IMPORT_FBX_READ_ALL_MATERIALS"
-
-// ---------------------------------------------------------------------------
-/** @brief Set whether the fbx importer will read materials.
- *
- * The default value is true (1)
- * Property type: bool
- */
-#define AI_CONFIG_IMPORT_FBX_READ_MATERIALS \
-    "IMPORT_FBX_READ_MATERIALS"
-
-// ---------------------------------------------------------------------------
-/** @brief Set whether the fbx importer will read embedded textures.
- *
- * The default value is true (1)
- * Property type: bool
- */
-#define AI_CONFIG_IMPORT_FBX_READ_TEXTURES \
-    "IMPORT_FBX_READ_TEXTURES"
-
-// ---------------------------------------------------------------------------
-/** @brief Set whether the fbx importer will read cameras.
- *
- * The default value is true (1)
- * Property type: bool
- */
-#define AI_CONFIG_IMPORT_FBX_READ_CAMERAS \
-    "IMPORT_FBX_READ_CAMERAS"
-
-// ---------------------------------------------------------------------------
-/** @brief Set whether the fbx importer will read light sources.
- *
- * The default value is true (1)
- * Property type: bool
- */
-#define AI_CONFIG_IMPORT_FBX_READ_LIGHTS \
-    "IMPORT_FBX_READ_LIGHTS"
-
-// ---------------------------------------------------------------------------
-/** @brief Set whether the fbx importer will read animations.
- *
- * The default value is true (1)
- * Property type: bool
- */
-#define AI_CONFIG_IMPORT_FBX_READ_ANIMATIONS \
-    "IMPORT_FBX_READ_ANIMATIONS"
-
-// ---------------------------------------------------------------------------
-/** @brief Set whether the fbx importer will read weights.
- *
- * The default value is true (1)
- * Property type: bool
- */
-#define AI_CONFIG_IMPORT_FBX_READ_WEIGHTS \
-    "IMPORT_FBX_READ_WEIGHTS"
-
-// ---------------------------------------------------------------------------
-/** @brief Set whether the fbx importer will act in strict mode in which only
- *    FBX 2013 is supported and any other sub formats are rejected. FBX 2013
- *    is the primary target for the importer, so this format is best
- *    supported and well-tested.
- *
- * The default value is false (0)
- * Property type: bool
- */
-#define AI_CONFIG_IMPORT_FBX_STRICT_MODE \
-    "IMPORT_FBX_STRICT_MODE"
-
-// ---------------------------------------------------------------------------
-/** @brief Set whether the fbx importer will preserve pivot points for
- *    transformations (as extra nodes). If set to false, pivots and offsets
- *    will be evaluated whenever possible.
- *
- * The default value is true (1)
- * Property type: bool
- */
-#define AI_CONFIG_IMPORT_FBX_PRESERVE_PIVOTS \
-    "IMPORT_FBX_PRESERVE_PIVOTS"
-
-// ---------------------------------------------------------------------------
-/** @brief Specifies whether the importer will drop empty animation curves or
- *    animation curves which match the bind pose transformation over their
- *    entire defined range.
- *
- * The default value is true (1)
- * Property type: bool
- */
-#define AI_CONFIG_IMPORT_FBX_OPTIMIZE_EMPTY_ANIMATION_CURVES \
-    "IMPORT_FBX_OPTIMIZE_EMPTY_ANIMATION_CURVES"
-
-// ---------------------------------------------------------------------------
-/** @brief Set whether the fbx importer will use the legacy embedded texture naming.
- *
- * The default value is false (0)
- * Property type: bool
- */
-#define AI_CONFIG_IMPORT_FBX_EMBEDDED_TEXTURES_LEGACY_NAMING \
-	"AI_CONFIG_IMPORT_FBX_EMBEDDED_TEXTURES_LEGACY_NAMING"
-
-// ---------------------------------------------------------------------------
-/** @brief  Set wether the importer shall not remove empty bones.
- *
- *  Empty bone are often used to define connections for other models.
- */
-#define AI_CONFIG_IMPORT_REMOVE_EMPTY_BONES \
-    "AI_CONFIG_IMPORT_REMOVE_EMPTY_BONES"
-
-
-// ---------------------------------------------------------------------------
-/** @brief  Set wether the FBX importer shall convert the unit from cm to m.
- */
-#define AI_CONFIG_FBX_CONVERT_TO_M \
-    "AI_CONFIG_FBX_CONVERT_TO_M"
-
-// ---------------------------------------------------------------------------
-/** @brief  Set the vertex animation keyframe to be imported
- *
- * ASSIMP does not support vertex keyframes (only bone animation is supported).
- * The library reads only one frame of models with vertex animations.
- * By default this is the first frame.
- * \note The default value is 0. This option applies to all importers.
- *   However, it is also possible to override the global setting
- *   for a specific loader. You can use the AI_CONFIG_IMPORT_XXX_KEYFRAME
- *   options (where XXX is a placeholder for the file format for which you
- *   want to override the global setting).
- * Property type: integer.
- */
-#define AI_CONFIG_IMPORT_GLOBAL_KEYFRAME    "IMPORT_GLOBAL_KEYFRAME"
-
-#define AI_CONFIG_IMPORT_MD3_KEYFRAME       "IMPORT_MD3_KEYFRAME"
-#define AI_CONFIG_IMPORT_MD2_KEYFRAME       "IMPORT_MD2_KEYFRAME"
-#define AI_CONFIG_IMPORT_MDL_KEYFRAME       "IMPORT_MDL_KEYFRAME"
-#define AI_CONFIG_IMPORT_MDC_KEYFRAME       "IMPORT_MDC_KEYFRAME"
-#define AI_CONFIG_IMPORT_SMD_KEYFRAME       "IMPORT_SMD_KEYFRAME"
-#define AI_CONFIG_IMPORT_UNREAL_KEYFRAME    "IMPORT_UNREAL_KEYFRAME"
-
-// ---------------------------------------------------------------------------
-/** @brief Set whether the MDL (HL1) importer will read animations.
- *
- * The default value is true (1)
- * Property type: bool
- */
-#define AI_CONFIG_IMPORT_MDL_HL1_READ_ANIMATIONS "IMPORT_MDL_HL1_READ_ANIMATIONS"
-
-// ---------------------------------------------------------------------------
-/** @brief Set whether the MDL (HL1) importer will read animation events.
- * \note This property requires AI_CONFIG_IMPORT_MDL_HL1_READ_ANIMATIONS to be set to true.
- *
- * The default value is true (1)
- * Property type: bool
- */
-#define AI_CONFIG_IMPORT_MDL_HL1_READ_ANIMATION_EVENTS "IMPORT_MDL_HL1_READ_ANIMATION_EVENTS"
-
-// ---------------------------------------------------------------------------
-/** @brief Set whether the MDL (HL1) importer will read blend controllers.
- * \note This property requires AI_CONFIG_IMPORT_MDL_HL1_READ_ANIMATIONS to be set to true.
- *
- * The default value is true (1)
- * Property type: bool
- */
-#define AI_CONFIG_IMPORT_MDL_HL1_READ_BLEND_CONTROLLERS "IMPORT_MDL_HL1_READ_BLEND_CONTROLLERS"
-
-// ---------------------------------------------------------------------------
-/** @brief Set whether the MDL (HL1) importer will read sequence transition graph.
- * \note This property requires AI_CONFIG_IMPORT_MDL_HL1_READ_ANIMATIONS to be set to true.
- *
- * The default value is true (1)
- * Property type: bool
- */
-#define AI_CONFIG_IMPORT_MDL_HL1_READ_SEQUENCE_TRANSITIONS "IMPORT_MDL_HL1_READ_SEQUENCE_TRANSITIONS"
-
-// ---------------------------------------------------------------------------
-/** @brief Set whether the MDL (HL1) importer will read attachments info.
- *
- * The default value is true (1)
- * Property type: bool
- */
-#define AI_CONFIG_IMPORT_MDL_HL1_READ_ATTACHMENTS "IMPORT_MDL_HL1_READ_ATTACHMENTS"
-
-// ---------------------------------------------------------------------------
-/** @brief Set whether the MDL (HL1) importer will read bone controllers info.
- *
- * The default value is true (1)
- * Property type: bool
- */
-#define AI_CONFIG_IMPORT_MDL_HL1_READ_BONE_CONTROLLERS "IMPORT_MDL_HL1_READ_BONE_CONTROLLERS"
-
-// ---------------------------------------------------------------------------
-/** @brief Set whether the MDL (HL1) importer will read hitboxes info.
- *
- * The default value is true (1)
- * Property type: bool
- */
-#define AI_CONFIG_IMPORT_MDL_HL1_READ_HITBOXES "IMPORT_MDL_HL1_READ_HITBOXES"
-
-// ---------------------------------------------------------------------------
-/** @brief Set whether the MDL (HL1) importer will read miscellaneous global model info.
- *
- * The default value is true (1)
- * Property type: bool
- */
-#define AI_CONFIG_IMPORT_MDL_HL1_READ_MISC_GLOBAL_INFO "IMPORT_MDL_HL1_READ_MISC_GLOBAL_INFO"
-
-// ---------------------------------------------------------------------------
-/** Smd load multiple animations
- *
- *  Property type: bool. Default value: true.
- */
-#define AI_CONFIG_IMPORT_SMD_LOAD_ANIMATION_LIST "IMPORT_SMD_LOAD_ANIMATION_LIST"
-
-// ---------------------------------------------------------------------------
-/** @brief  Configures the AC loader to collect all surfaces which have the
- *    "Backface cull" flag set in separate meshes.
- *
- *  Property type: bool. Default value: true.
- */
-#define AI_CONFIG_IMPORT_AC_SEPARATE_BFCULL \
-    "IMPORT_AC_SEPARATE_BFCULL"
-
-// ---------------------------------------------------------------------------
-/** @brief  Configures whether the AC loader evaluates subdivision surfaces (
- *  indicated by the presence of the 'subdiv' attribute in the file). By
- *  default, Assimp performs the subdivision using the standard
- *  Catmull-Clark algorithm
- *
- * * Property type: bool. Default value: true.
- */
-#define AI_CONFIG_IMPORT_AC_EVAL_SUBDIVISION    \
-    "IMPORT_AC_EVAL_SUBDIVISION"
-
-// ---------------------------------------------------------------------------
-/** @brief  Configures the UNREAL 3D loader to separate faces with different
- *    surface flags (e.g. two-sided vs. single-sided).
- *
- * * Property type: bool. Default value: true.
- */
-#define AI_CONFIG_IMPORT_UNREAL_HANDLE_FLAGS \
-    "UNREAL_HANDLE_FLAGS"
-
-// ---------------------------------------------------------------------------
-/** @brief Configures the terragen import plugin to compute uv's for
- *  terrains, if not given. Furthermore a default texture is assigned.
- *
- * UV coordinates for terrains are so simple to compute that you'll usually
- * want to compute them on your own, if you need them. This option is intended
- * for model viewers which want to offer an easy way to apply textures to
- * terrains.
- * * Property type: bool. Default value: false.
- */
-#define AI_CONFIG_IMPORT_TER_MAKE_UVS \
-    "IMPORT_TER_MAKE_UVS"
-
-// ---------------------------------------------------------------------------
-/** @brief  Configures the ASE loader to always reconstruct normal vectors
- *  basing on the smoothing groups loaded from the file.
- *
- * Some ASE files have carry invalid normals, other don't.
- * * Property type: bool. Default value: true.
- */
-#define AI_CONFIG_IMPORT_ASE_RECONSTRUCT_NORMALS    \
-    "IMPORT_ASE_RECONSTRUCT_NORMALS"
-
-// ---------------------------------------------------------------------------
-/** @brief  Configures the M3D loader to detect and process multi-part
- *    Quake player models.
- *
- * These models usually consist of 3 files, lower.md3, upper.md3 and
- * head.md3. If this property is set to true, Assimp will try to load and
- * combine all three files if one of them is loaded.
- * Property type: bool. Default value: true.
- */
-#define AI_CONFIG_IMPORT_MD3_HANDLE_MULTIPART \
-    "IMPORT_MD3_HANDLE_MULTIPART"
-
-// ---------------------------------------------------------------------------
-/** @brief  Tells the MD3 loader which skin files to load.
- *
- * When loading MD3 files, Assimp checks whether a file
- * [md3_file_name]_[skin_name].skin is existing. These files are used by
- * Quake III to be able to assign different skins (e.g. red and blue team)
- * to models. 'default', 'red', 'blue' are typical skin names.
- * Property type: String. Default value: "default".
- */
-#define AI_CONFIG_IMPORT_MD3_SKIN_NAME \
-    "IMPORT_MD3_SKIN_NAME"
-
-// ---------------------------------------------------------------------------
-/** @brief  Specify if to try load Quake 3 shader files. This also controls
- *  original surface name handling: when disabled it will be used unchanged.
- *
- * Property type: bool. Default value: true.
- */
-#define AI_CONFIG_IMPORT_MD3_LOAD_SHADERS \
-    "IMPORT_MD3_LOAD_SHADERS"
-
-// ---------------------------------------------------------------------------
-/** @brief  Specify the Quake 3 shader file to be used for a particular
- *  MD3 file. This can also be a search path.
- *
- * By default Assimp's behaviour is as follows: If a MD3 file
- * <tt>any_path/models/any_q3_subdir/model_name/file_name.md3</tt> is
- * loaded, the library tries to locate the corresponding shader file in
- * <tt>any_path/scripts/model_name.shader</tt>. This property overrides this
- * behaviour. It can either specify a full path to the shader to be loaded
- * or alternatively the path (relative or absolute) to the directory where
- * the shaders for all MD3s to be loaded reside. Assimp attempts to open
- * <tt>IMPORT_MD3_SHADER_SRC/model_name.shader</tt> first, <tt>IMPORT_MD3_SHADER_SRC/file_name.shader</tt>
- * is the fallback file. Note that IMPORT_MD3_SHADER_SRC should have a terminal (back)slash.
- * Property type: String. Default value: n/a.
- */
-#define AI_CONFIG_IMPORT_MD3_SHADER_SRC \
-    "IMPORT_MD3_SHADER_SRC"
-
-// ---------------------------------------------------------------------------
-/** @brief  Configures the LWO loader to load just one layer from the model.
- *
- * LWO files consist of layers and in some cases it could be useful to load
- * only one of them. This property can be either a string - which specifies
- * the name of the layer - or an integer - the index of the layer. If the
- * property is not set the whole LWO model is loaded. Loading fails if the
- * requested layer is not available. The layer index is zero-based and the
- * layer name may not be empty.<br>
- * Property type: Integer. Default value: all layers are loaded.
- */
-#define AI_CONFIG_IMPORT_LWO_ONE_LAYER_ONLY         \
-    "IMPORT_LWO_ONE_LAYER_ONLY"
-
-// ---------------------------------------------------------------------------
-/** @brief  Configures the MD5 loader to not load the MD5ANIM file for
- *  a MD5MESH file automatically.
- *
- * The default strategy is to look for a file with the same name but the
- * MD5ANIM extension in the same directory. If it is found, it is loaded
- * and combined with the MD5MESH file. This configuration option can be
- * used to disable this behaviour.
- *
- * * Property type: bool. Default value: false.
- */
-#define AI_CONFIG_IMPORT_MD5_NO_ANIM_AUTOLOAD           \
-    "IMPORT_MD5_NO_ANIM_AUTOLOAD"
-
-// ---------------------------------------------------------------------------
-/** @brief Defines the begin of the time range for which the LWS loader
- *    evaluates animations and computes aiNodeAnim's.
- *
- * Assimp provides full conversion of LightWave's envelope system, including
- * pre and post conditions. The loader computes linearly subsampled animation
- * chanels with the frame rate given in the LWS file. This property defines
- * the start time. Note: animation channels are only generated if a node
- * has at least one envelope with more tan one key assigned. This property.
- * is given in frames, '0' is the first frame. By default, if this property
- * is not set, the importer takes the animation start from the input LWS
- * file ('FirstFrame' line)<br>
- * Property type: Integer. Default value: taken from file.
- *
- * @see AI_CONFIG_IMPORT_LWS_ANIM_END - end of the imported time range
- */
-#define AI_CONFIG_IMPORT_LWS_ANIM_START         \
-    "IMPORT_LWS_ANIM_START"
-#define AI_CONFIG_IMPORT_LWS_ANIM_END           \
-    "IMPORT_LWS_ANIM_END"
-
-// ---------------------------------------------------------------------------
-/** @brief Defines the output frame rate of the IRR loader.
- *
- * IRR animations are difficult to convert for Assimp and there will
- * always be a loss of quality. This setting defines how many keys per second
- * are returned by the converter.<br>
- * Property type: integer. Default value: 100
- */
-#define AI_CONFIG_IMPORT_IRR_ANIM_FPS               \
-    "IMPORT_IRR_ANIM_FPS"
-
-// ---------------------------------------------------------------------------
-/** @brief Ogre Importer will try to find referenced materials from this file.
- *
- * Ogre meshes reference with material names, this does not tell Assimp the file
- * where it is located in. Assimp will try to find the source file in the following
- * order: <material-name>.material, <mesh-filename-base>.material and
- * lastly the material name defined by this config property.
- * <br>
- * Property type: String. Default value: Scene.material.
- */
-#define AI_CONFIG_IMPORT_OGRE_MATERIAL_FILE \
-    "IMPORT_OGRE_MATERIAL_FILE"
-
-// ---------------------------------------------------------------------------
-/** @brief Ogre Importer detect the texture usage from its filename.
- *
- * Ogre material texture units do not define texture type, the textures usage
- * depends on the used shader or Ogre's fixed pipeline. If this config property
- * is true Assimp will try to detect the type from the textures filename postfix:
- * _n, _nrm, _nrml, _normal, _normals and _normalmap for normal map, _s, _spec,
- * _specular and _specularmap for specular map, _l, _light, _lightmap, _occ
- * and _occlusion for light map, _disp and _displacement for displacement map.
- * The matching is case insensitive. Post fix is taken between the last
- * underscore and the last period.
- * Default behavior is to detect type from lower cased texture unit name by
- * matching against: normalmap, specularmap, lightmap and displacementmap.
- * For both cases if no match is found aiTextureType_DIFFUSE is used.
- * <br>
- * Property type: Bool. Default value: false.
- */
-#define AI_CONFIG_IMPORT_OGRE_TEXTURETYPE_FROM_FILENAME \
-    "IMPORT_OGRE_TEXTURETYPE_FROM_FILENAME"
-
- /** @brief Specifies whether the Android JNI asset extraction is supported.
-  *
-  * Turn on this option if you want to manage assets in native
-  * Android application without having to keep the internal directory and asset
-  * manager pointer.
-  */
- #define AI_CONFIG_ANDROID_JNI_ASSIMP_MANAGER_SUPPORT "AI_CONFIG_ANDROID_JNI_ASSIMP_MANAGER_SUPPORT"
-
-// ---------------------------------------------------------------------------
-/** @brief Specifies whether the IFC loader skips over IfcSpace elements.
- *
- * IfcSpace elements (and their geometric representations) are used to
- * represent, well, free space in a building storey.<br>
- * Property type: Bool. Default value: true.
- */
-#define AI_CONFIG_IMPORT_IFC_SKIP_SPACE_REPRESENTATIONS "IMPORT_IFC_SKIP_SPACE_REPRESENTATIONS"
-
-// ---------------------------------------------------------------------------
-/** @brief Specifies whether the IFC loader will use its own, custom triangulation
- *   algorithm to triangulate wall and floor meshes.
- *
- * If this property is set to false, walls will be either triangulated by
- * #aiProcess_Triangulate or will be passed through as huge polygons with
- * faked holes (i.e. holes that are connected with the outer boundary using
- * a dummy edge). It is highly recommended to set this property to true
- * if you want triangulated data because #aiProcess_Triangulate is known to
- * have problems with the kind of polygons that the IFC loader spits out for
- * complicated meshes.
- * Property type: Bool. Default value: true.
- */
-#define AI_CONFIG_IMPORT_IFC_CUSTOM_TRIANGULATION "IMPORT_IFC_CUSTOM_TRIANGULATION"
-
-// ---------------------------------------------------------------------------
-/** @brief  Set the tessellation conic angle for IFC smoothing curves.
- *
- * This is used by the IFC importer to determine the tessellation parameter
- * for smoothing curves.
- * @note The default value is AI_IMPORT_IFC_DEFAULT_SMOOTHING_ANGLE and the
- * accepted values are in range [5.0, 120.0].
- * Property type: Float.
- */
-#define AI_CONFIG_IMPORT_IFC_SMOOTHING_ANGLE "IMPORT_IFC_SMOOTHING_ANGLE"
-
-// default value for AI_CONFIG_IMPORT_IFC_SMOOTHING_ANGLE
-#if (!defined AI_IMPORT_IFC_DEFAULT_SMOOTHING_ANGLE)
-#   define AI_IMPORT_IFC_DEFAULT_SMOOTHING_ANGLE 10.0f
-#endif
-
-// ---------------------------------------------------------------------------
-/** @brief  Set the tessellation for IFC cylindrical shapes.
- *
- * This is used by the IFC importer to determine the tessellation parameter
- * for cylindrical shapes, i.e. the number of segments used to approximate a circle.
- * @note The default value is AI_IMPORT_IFC_DEFAULT_CYLINDRICAL_TESSELLATION and the
- * accepted values are in range [3, 180].
- * Property type: Integer.
- */
-#define AI_CONFIG_IMPORT_IFC_CYLINDRICAL_TESSELLATION "IMPORT_IFC_CYLINDRICAL_TESSELLATION"
-
-// default value for AI_CONFIG_IMPORT_IFC_CYLINDRICAL_TESSELLATION
-#if (!defined AI_IMPORT_IFC_DEFAULT_CYLINDRICAL_TESSELLATION)
-#   define AI_IMPORT_IFC_DEFAULT_CYLINDRICAL_TESSELLATION 32
-#endif
-
-// ---------------------------------------------------------------------------
-/** @brief Specifies whether the Collada loader will ignore the provided up direction.
- *
- * If this property is set to true, the up direction provided in the file header will
- * be ignored and the file will be loaded as is.
- * Property type: Bool. Default value: false.
- */
-#define AI_CONFIG_IMPORT_COLLADA_IGNORE_UP_DIRECTION "IMPORT_COLLADA_IGNORE_UP_DIRECTION"
-
-// ---------------------------------------------------------------------------
-/** @brief Specifies whether the Collada loader should use Collada names.
- *
- * If this property is set to true, the Collada names will be used as the node and
- * mesh names. The default is to use the id tag (resp. sid tag, if no id tag is present)
- * instead.
- * Property type: Bool. Default value: false.
- */
-#define AI_CONFIG_IMPORT_COLLADA_USE_COLLADA_NAMES "IMPORT_COLLADA_USE_COLLADA_NAMES"
-
-// ---------- All the Export defines ------------
-
-/** @brief Specifies the xfile use double for real values of float
- *
- * Property type: Bool. Default value: false.
- */
-
-#define AI_CONFIG_EXPORT_XFILE_64BIT "EXPORT_XFILE_64BIT"
-
-/** @brief Specifies whether the assimp export shall be able to export point clouds
- *
- *  When this flag is not defined the render data has to contain valid faces.
- *  Point clouds are only a collection of vertices which have nor spatial organization
- *  by a face and the validation process will remove them. Enabling this feature will
- *  switch off the flag and enable the functionality to export pure point clouds.
- */
-#define AI_CONFIG_EXPORT_POINT_CLOUDS "EXPORT_POINT_CLOUDS"
-
-/**
- * @brief Specifies the blob name, assimp uses for exporting.
- * 
- * Some formats require auxiliary files to be written, that need to be linked back into 
- * the original file. For example, OBJ files export materials to a separate MTL file and
- * use the `mtllib` keyword to reference this file.
- * 
- * When exporting blobs using #ExportToBlob, assimp does not know the name of the blob
- * file and thus outputs `mtllib $blobfile.mtl`, which might not be desired, since the 
- * MTL file might be called differently. 
- * 
- * This property can be used to give the exporter a hint on how to use the magic 
- * `$blobfile` keyword. If the exporter detects the keyword and is provided with a name
- * for the blob, it instead uses this name.
- */
-#define AI_CONFIG_EXPORT_BLOB_NAME "EXPORT_BLOB_NAME"
-
-/**
- *  @brief  Specifies a gobal key factor for scale, float value
- */
-#define AI_CONFIG_GLOBAL_SCALE_FACTOR_KEY "GLOBAL_SCALE_FACTOR"
-
-#if (!defined AI_CONFIG_GLOBAL_SCALE_FACTOR_DEFAULT)
-#   define AI_CONFIG_GLOBAL_SCALE_FACTOR_DEFAULT  1.0f
-#endif // !! AI_DEBONE_THRESHOLD
-
-#define AI_CONFIG_APP_SCALE_KEY "APP_SCALE_FACTOR"
-
-#if (!defined AI_CONFIG_APP_SCALE_KEY)
-#   define AI_CONFIG_APP_SCALE_KEY 1.0
-#endif // AI_CONFIG_APP_SCALE_KEY
-
-
-// ---------- All the Build/Compile-time defines ------------
-
-/** @brief Specifies if double precision is supported inside assimp
- *
- * Property type: Bool. Default value: undefined.
- */
-
-#cmakedefine ASSIMP_DOUBLE_PRECISION 1
-
-#endif // !! AI_CONFIG_H_INC