diff options
Diffstat (limited to 'libs/assimp/contrib/gtest/docs/V1_5_AdvancedGuide.md')
| -rw-r--r-- | libs/assimp/contrib/gtest/docs/V1_5_AdvancedGuide.md | 2096 |
1 files changed, 2096 insertions, 0 deletions
diff --git a/libs/assimp/contrib/gtest/docs/V1_5_AdvancedGuide.md b/libs/assimp/contrib/gtest/docs/V1_5_AdvancedGuide.md new file mode 100644 index 0000000..34e19c2 --- /dev/null +++ b/libs/assimp/contrib/gtest/docs/V1_5_AdvancedGuide.md @@ -0,0 +1,2096 @@ + + +Now that you have read [Primer](V1_5_Primer.md) and learned how to write tests +using Google Test, it's time to learn some new tricks. This document +will show you more assertions as well as how to construct complex +failure messages, propagate fatal failures, reuse and speed up your +test fixtures, and use various flags with your tests. + +# More Assertions # + +This section covers some less frequently used, but still significant, +assertions. + +## Explicit Success and Failure ## + +These three assertions do not actually test a value or expression. Instead, +they generate a success or failure directly. Like the macros that actually +perform a test, you may stream a custom failure message into the them. + +| `SUCCEED();` | +|:-------------| + +Generates a success. This does NOT make the overall test succeed. A test is +considered successful only if none of its assertions fail during its execution. + +Note: `SUCCEED()` is purely documentary and currently doesn't generate any +user-visible output. However, we may add `SUCCEED()` messages to Google Test's +output in the future. + +| `FAIL();` | `ADD_FAILURE();` | +|:-----------|:-----------------| + +`FAIL*` generates a fatal failure while `ADD_FAILURE*` generates a nonfatal +failure. These are useful when control flow, rather than a Boolean expression, +deteremines the test's success or failure. For example, you might want to write +something like: + +``` +switch(expression) { + case 1: ... some checks ... + case 2: ... some other checks + ... + default: FAIL() << "We shouldn't get here."; +} +``` + +_Availability_: Linux, Windows, Mac. + +## Exception Assertions ## + +These are for verifying that a piece of code throws (or does not +throw) an exception of the given type: + +| **Fatal assertion** | **Nonfatal assertion** | **Verifies** | +|:--------------------|:-----------------------|:-------------| +| `ASSERT_THROW(`_statement_, _exception\_type_`);` | `EXPECT_THROW(`_statement_, _exception\_type_`);` | _statement_ throws an exception of the given type | +| `ASSERT_ANY_THROW(`_statement_`);` | `EXPECT_ANY_THROW(`_statement_`);` | _statement_ throws an exception of any type | +| `ASSERT_NO_THROW(`_statement_`);` | `EXPECT_NO_THROW(`_statement_`);` | _statement_ doesn't throw any exception | + +Examples: + +``` +ASSERT_THROW(Foo(5), bar_exception); + +EXPECT_NO_THROW({ + int n = 5; + Bar(&n); +}); +``` + +_Availability_: Linux, Windows, Mac; since version 1.1.0. + +## Predicate Assertions for Better Error Messages ## + +Even though Google Test has a rich set of assertions, they can never be +complete, as it's impossible (nor a good idea) to anticipate all the scenarios +a user might run into. Therefore, sometimes a user has to use `EXPECT_TRUE()` +to check a complex expression, for lack of a better macro. This has the problem +of not showing you the values of the parts of the expression, making it hard to +understand what went wrong. As a workaround, some users choose to construct the +failure message by themselves, streaming it into `EXPECT_TRUE()`. However, this +is awkward especially when the expression has side-effects or is expensive to +evaluate. + +Google Test gives you three different options to solve this problem: + +### Using an Existing Boolean Function ### + +If you already have a function or a functor that returns `bool` (or a type +that can be implicitly converted to `bool`), you can use it in a _predicate +assertion_ to get the function arguments printed for free: + +| **Fatal assertion** | **Nonfatal assertion** | **Verifies** | +|:--------------------|:-----------------------|:-------------| +| `ASSERT_PRED1(`_pred1, val1_`);` | `EXPECT_PRED1(`_pred1, val1_`);` | _pred1(val1)_ returns true | +| `ASSERT_PRED2(`_pred2, val1, val2_`);` | `EXPECT_PRED2(`_pred2, val1, val2_`);` | _pred2(val1, val2)_ returns true | +| ... | ... | ... | + +In the above, _predn_ is an _n_-ary predicate function or functor, where +_val1_, _val2_, ..., and _valn_ are its arguments. The assertion succeeds +if the predicate returns `true` when applied to the given arguments, and fails +otherwise. When the assertion fails, it prints the value of each argument. In +either case, the arguments are evaluated exactly once. + +Here's an example. Given + +``` +// Returns true iff m and n have no common divisors except 1. +bool MutuallyPrime(int m, int n) { ... } +const int a = 3; +const int b = 4; +const int c = 10; +``` + +the assertion `EXPECT_PRED2(MutuallyPrime, a, b);` will succeed, while the +assertion `EXPECT_PRED2(MutuallyPrime, b, c);` will fail with the message + +<pre> +!MutuallyPrime(b, c) is false, where<br> +b is 4<br> +c is 10<br> +</pre> + +**Notes:** + + 1. If you see a compiler error "no matching function to call" when using `ASSERT_PRED*` or `EXPECT_PRED*`, please see [this](V1_5_FAQ.md#the-compiler-complains-about-undefined-references-to-some-static-const-member-variables-but-i-did-define-them-in-the-class-body-whats-wrong) for how to resolve it. + 1. Currently we only provide predicate assertions of arity <= 5. If you need a higher-arity assertion, let us know. + +_Availability_: Linux, Windows, Mac + +### Using a Function That Returns an AssertionResult ### + +While `EXPECT_PRED*()` and friends are handy for a quick job, the +syntax is not satisfactory: you have to use different macros for +different arities, and it feels more like Lisp than C++. The +`::testing::AssertionResult` class solves this problem. + +An `AssertionResult` object represents the result of an assertion +(whether it's a success or a failure, and an associated message). You +can create an `AssertionResult` using one of these factory +functions: + +``` +namespace testing { + +// Returns an AssertionResult object to indicate that an assertion has +// succeeded. +AssertionResult AssertionSuccess(); + +// Returns an AssertionResult object to indicate that an assertion has +// failed. +AssertionResult AssertionFailure(); + +} +``` + +You can then use the `<<` operator to stream messages to the +`AssertionResult` object. + +To provide more readable messages in Boolean assertions +(e.g. `EXPECT_TRUE()`), write a predicate function that returns +`AssertionResult` instead of `bool`. For example, if you define +`IsEven()` as: + +``` +::testing::AssertionResult IsEven(int n) { + if ((n % 2) == 0) + return ::testing::AssertionSuccess(); + else + return ::testing::AssertionFailure() << n << " is odd"; +} +``` + +instead of: + +``` +bool IsEven(int n) { + return (n % 2) == 0; +} +``` + +the failed assertion `EXPECT_TRUE(IsEven(Fib(4)))` will print: + +<pre> +Value of: !IsEven(Fib(4))<br> +Actual: false (*3 is odd*)<br> +Expected: true<br> +</pre> + +instead of a more opaque + +<pre> +Value of: !IsEven(Fib(4))<br> +Actual: false<br> +Expected: true<br> +</pre> + +If you want informative messages in `EXPECT_FALSE` and `ASSERT_FALSE` +as well, and are fine with making the predicate slower in the success +case, you can supply a success message: + +``` +::testing::AssertionResult IsEven(int n) { + if ((n % 2) == 0) + return ::testing::AssertionSuccess() << n << " is even"; + else + return ::testing::AssertionFailure() << n << " is odd"; +} +``` + +Then the statement `EXPECT_FALSE(IsEven(Fib(6)))` will print + +<pre> +Value of: !IsEven(Fib(6))<br> +Actual: true (8 is even)<br> +Expected: false<br> +</pre> + +_Availability_: Linux, Windows, Mac; since version 1.4.1. + +### Using a Predicate-Formatter ### + +If you find the default message generated by `(ASSERT|EXPECT)_PRED*` and +`(ASSERT|EXPECT)_(TRUE|FALSE)` unsatisfactory, or some arguments to your +predicate do not support streaming to `ostream`, you can instead use the +following _predicate-formatter assertions_ to _fully_ customize how the +message is formatted: + +| **Fatal assertion** | **Nonfatal assertion** | **Verifies** | +|:--------------------|:-----------------------|:-------------| +| `ASSERT_PRED_FORMAT1(`_pred\_format1, val1_`);` | `EXPECT_PRED_FORMAT1(`_pred\_format1, val1_`); | _pred\_format1(val1)_ is successful | +| `ASSERT_PRED_FORMAT2(`_pred\_format2, val1, val2_`);` | `EXPECT_PRED_FORMAT2(`_pred\_format2, val1, val2_`);` | _pred\_format2(val1, val2)_ is successful | +| `...` | `...` | `...` | + +The difference between this and the previous two groups of macros is that instead of +a predicate, `(ASSERT|EXPECT)_PRED_FORMAT*` take a _predicate-formatter_ +(_pred\_formatn_), which is a function or functor with the signature: + +`::testing::AssertionResult PredicateFormattern(const char* `_expr1_`, const char* `_expr2_`, ... const char* `_exprn_`, T1 `_val1_`, T2 `_val2_`, ... Tn `_valn_`);` + +where _val1_, _val2_, ..., and _valn_ are the values of the predicate +arguments, and _expr1_, _expr2_, ..., and _exprn_ are the corresponding +expressions as they appear in the source code. The types `T1`, `T2`, ..., and +`Tn` can be either value types or reference types. For example, if an +argument has type `Foo`, you can declare it as either `Foo` or `const Foo&`, +whichever is appropriate. + +A predicate-formatter returns a `::testing::AssertionResult` object to indicate +whether the assertion has succeeded or not. The only way to create such an +object is to call one of these factory functions: + +As an example, let's improve the failure message in the previous example, which uses `EXPECT_PRED2()`: + +``` +// Returns the smallest prime common divisor of m and n, +// or 1 when m and n are mutually prime. +int SmallestPrimeCommonDivisor(int m, int n) { ... } + +// A predicate-formatter for asserting that two integers are mutually prime. +::testing::AssertionResult AssertMutuallyPrime(const char* m_expr, + const char* n_expr, + int m, + int n) { + if (MutuallyPrime(m, n)) + return ::testing::AssertionSuccess(); + + return ::testing::AssertionFailure() + << m_expr << " and " << n_expr << " (" << m << " and " << n + << ") are not mutually prime, " << "as they have a common divisor " + << SmallestPrimeCommonDivisor(m, n); +} +``` + +With this predicate-formatter, we can use + +``` +EXPECT_PRED_FORMAT2(AssertMutuallyPrime, b, c); +``` + +to generate the message + +<pre> +b and c (4 and 10) are not mutually prime, as they have a common divisor 2.<br> +</pre> + +As you may have realized, many of the assertions we introduced earlier are +special cases of `(EXPECT|ASSERT)_PRED_FORMAT*`. In fact, most of them are +indeed defined using `(EXPECT|ASSERT)_PRED_FORMAT*`. + +_Availability_: Linux, Windows, Mac. + + +## Floating-Point Comparison ## + +Comparing floating-point numbers is tricky. Due to round-off errors, it is +very unlikely that two floating-points will match exactly. Therefore, +`ASSERT_EQ` 's naive comparison usually doesn't work. And since floating-points +can have a wide value range, no single fixed error bound works. It's better to +compare by a fixed relative error bound, except for values close to 0 due to +the loss of precision there. + +In general, for floating-point comparison to make sense, the user needs to +carefully choose the error bound. If they don't want or care to, comparing in +terms of Units in the Last Place (ULPs) is a good default, and Google Test +provides assertions to do this. Full details about ULPs are quite long; if you +want to learn more, see +[this article on float comparison](http://www.cygnus-software.com/papers/comparingfloats/comparingfloats.htm). + +### Floating-Point Macros ### + +| **Fatal assertion** | **Nonfatal assertion** | **Verifies** | +|:--------------------|:-----------------------|:-------------| +| `ASSERT_FLOAT_EQ(`_expected, actual_`);` | `EXPECT_FLOAT_EQ(`_expected, actual_`);` | the two `float` values are almost equal | +| `ASSERT_DOUBLE_EQ(`_expected, actual_`);` | `EXPECT_DOUBLE_EQ(`_expected, actual_`);` | the two `double` values are almost equal | + +By "almost equal", we mean the two values are within 4 ULP's from each +other. + +The following assertions allow you to choose the acceptable error bound: + +| **Fatal assertion** | **Nonfatal assertion** | **Verifies** | +|:--------------------|:-----------------------|:-------------| +| `ASSERT_NEAR(`_val1, val2, abs\_error_`);` | `EXPECT_NEAR`_(val1, val2, abs\_error_`);` | the difference between _val1_ and _val2_ doesn't exceed the given absolute error | + +_Availability_: Linux, Windows, Mac. + +### Floating-Point Predicate-Format Functions ### + +Some floating-point operations are useful, but not that often used. In order +to avoid an explosion of new macros, we provide them as predicate-format +functions that can be used in predicate assertion macros (e.g. +`EXPECT_PRED_FORMAT2`, etc). + +``` +EXPECT_PRED_FORMAT2(::testing::FloatLE, val1, val2); +EXPECT_PRED_FORMAT2(::testing::DoubleLE, val1, val2); +``` + +Verifies that _val1_ is less than, or almost equal to, _val2_. You can +replace `EXPECT_PRED_FORMAT2` in the above table with `ASSERT_PRED_FORMAT2`. + +_Availability_: Linux, Windows, Mac. + +## Windows HRESULT assertions ## + +These assertions test for `HRESULT` success or failure. + +| **Fatal assertion** | **Nonfatal assertion** | **Verifies** | +|:--------------------|:-----------------------|:-------------| +| `ASSERT_HRESULT_SUCCEEDED(`_expression_`);` | `EXPECT_HRESULT_SUCCEEDED(`_expression_`);` | _expression_ is a success `HRESULT` | +| `ASSERT_HRESULT_FAILED(`_expression_`);` | `EXPECT_HRESULT_FAILED(`_expression_`);` | _expression_ is a failure `HRESULT` | + +The generated output contains the human-readable error message +associated with the `HRESULT` code returned by _expression_. + +You might use them like this: + +``` +CComPtr shell; +ASSERT_HRESULT_SUCCEEDED(shell.CoCreateInstance(L"Shell.Application")); +CComVariant empty; +ASSERT_HRESULT_SUCCEEDED(shell->ShellExecute(CComBSTR(url), empty, empty, empty, empty)); +``` + +_Availability_: Windows. + +## Type Assertions ## + +You can call the function +``` +::testing::StaticAssertTypeEq<T1, T2>(); +``` +to assert that types `T1` and `T2` are the same. The function does +nothing if the assertion is satisfied. If the types are different, +the function call will fail to compile, and the compiler error message +will likely (depending on the compiler) show you the actual values of +`T1` and `T2`. This is mainly useful inside template code. + +_Caveat:_ When used inside a member function of a class template or a +function template, `StaticAssertTypeEq<T1, T2>()` is effective _only if_ +the function is instantiated. For example, given: +``` +template <typename T> class Foo { + public: + void Bar() { ::testing::StaticAssertTypeEq<int, T>(); } +}; +``` +the code: +``` +void Test1() { Foo<bool> foo; } +``` +will _not_ generate a compiler error, as `Foo<bool>::Bar()` is never +actually instantiated. Instead, you need: +``` +void Test2() { Foo<bool> foo; foo.Bar(); } +``` +to cause a compiler error. + +_Availability:_ Linux, Windows, Mac; since version 1.3.0. + +## Assertion Placement ## + +You can use assertions in any C++ function. In particular, it doesn't +have to be a method of the test fixture class. The one constraint is +that assertions that generate a fatal failure (`FAIL*` and `ASSERT_*`) +can only be used in void-returning functions. This is a consequence of +Google Test not using exceptions. By placing it in a non-void function +you'll get a confusing compile error like +`"error: void value not ignored as it ought to be"`. + +If you need to use assertions in a function that returns non-void, one option +is to make the function return the value in an out parameter instead. For +example, you can rewrite `T2 Foo(T1 x)` to `void Foo(T1 x, T2* result)`. You +need to make sure that `*result` contains some sensible value even when the +function returns prematurely. As the function now returns `void`, you can use +any assertion inside of it. + +If changing the function's type is not an option, you should just use +assertions that generate non-fatal failures, such as `ADD_FAILURE*` and +`EXPECT_*`. + +_Note_: Constructors and destructors are not considered void-returning +functions, according to the C++ language specification, and so you may not use +fatal assertions in them. You'll get a compilation error if you try. A simple +workaround is to transfer the entire body of the constructor or destructor to a +private void-returning method. However, you should be aware that a fatal +assertion failure in a constructor does not terminate the current test, as your +intuition might suggest; it merely returns from the constructor early, possibly +leaving your object in a partially-constructed state. Likewise, a fatal +assertion failure in a destructor may leave your object in a +partially-destructed state. Use assertions carefully in these situations! + +# Death Tests # + +In many applications, there are assertions that can cause application failure +if a condition is not met. These sanity checks, which ensure that the program +is in a known good state, are there to fail at the earliest possible time after +some program state is corrupted. If the assertion checks the wrong condition, +then the program may proceed in an erroneous state, which could lead to memory +corruption, security holes, or worse. Hence it is vitally important to test +that such assertion statements work as expected. + +Since these precondition checks cause the processes to die, we call such tests +_death tests_. More generally, any test that checks that a program terminates +in an expected fashion is also a death test. + +If you want to test `EXPECT_*()/ASSERT_*()` failures in your test code, see [Catching Failures](#catching-failures). + +## How to Write a Death Test ## + +Google Test has the following macros to support death tests: + +| **Fatal assertion** | **Nonfatal assertion** | **Verifies** | +|:--------------------|:-----------------------|:-------------| +| `ASSERT_DEATH(`_statement, regex_`); | `EXPECT_DEATH(`_statement, regex_`); | _statement_ crashes with the given error | +| `ASSERT_DEATH_IF_SUPPORTED(`_statement, regex_`); | `EXPECT_DEATH_IF_SUPPORTED(`_statement, regex_`); | if death tests are supported, verifies that _statement_ crashes with the given error; otherwise verifies nothing | +| `ASSERT_EXIT(`_statement, predicate, regex_`); | `EXPECT_EXIT(`_statement, predicate, regex_`); |_statement_ exits with the given error and its exit code matches _predicate_ | + +where _statement_ is a statement that is expected to cause the process to +die, _predicate_ is a function or function object that evaluates an integer +exit status, and _regex_ is a regular expression that the stderr output of +_statement_ is expected to match. Note that _statement_ can be _any valid +statement_ (including _compound statement_) and doesn't have to be an +expression. + +As usual, the `ASSERT` variants abort the current test function, while the +`EXPECT` variants do not. + +**Note:** We use the word "crash" here to mean that the process +terminates with a _non-zero_ exit status code. There are two +possibilities: either the process has called `exit()` or `_exit()` +with a non-zero value, or it may be killed by a signal. + +This means that if _statement_ terminates the process with a 0 exit +code, it is _not_ considered a crash by `EXPECT_DEATH`. Use +`EXPECT_EXIT` instead if this is the case, or if you want to restrict +the exit code more precisely. + +A predicate here must accept an `int` and return a `bool`. The death test +succeeds only if the predicate returns `true`. Google Test defines a few +predicates that handle the most common cases: + +``` +::testing::ExitedWithCode(exit_code) +``` + +This expression is `true` if the program exited normally with the given exit +code. + +``` +::testing::KilledBySignal(signal_number) // Not available on Windows. +``` + +This expression is `true` if the program was killed by the given signal. + +The `*_DEATH` macros are convenient wrappers for `*_EXIT` that use a predicate +that verifies the process' exit code is non-zero. + +Note that a death test only cares about three things: + + 1. does _statement_ abort or exit the process? + 1. (in the case of `ASSERT_EXIT` and `EXPECT_EXIT`) does the exit status satisfy _predicate_? Or (in the case of `ASSERT_DEATH` and `EXPECT_DEATH`) is the exit status non-zero? And + 1. does the stderr output match _regex_? + +In particular, if _statement_ generates an `ASSERT_*` or `EXPECT_*` failure, it will **not** cause the death test to fail, as Google Test assertions don't abort the process. + +To write a death test, simply use one of the above macros inside your test +function. For example, + +``` +TEST(My*DeathTest*, Foo) { + // This death test uses a compound statement. + ASSERT_DEATH({ int n = 5; Foo(&n); }, "Error on line .* of Foo()"); +} +TEST(MyDeathTest, NormalExit) { + EXPECT_EXIT(NormalExit(), ::testing::ExitedWithCode(0), "Success"); +} +TEST(MyDeathTest, KillMyself) { + EXPECT_EXIT(KillMyself(), ::testing::KilledBySignal(SIGKILL), "Sending myself unblockable signal"); +} +``` + +verifies that: + + * calling `Foo(5)` causes the process to die with the given error message, + * calling `NormalExit()` causes the process to print `"Success"` to stderr and exit with exit code 0, and + * calling `KillMyself()` kills the process with signal `SIGKILL`. + +The test function body may contain other assertions and statements as well, if +necessary. + +_Important:_ We strongly recommend you to follow the convention of naming your +test case (not test) `*DeathTest` when it contains a death test, as +demonstrated in the above example. The `Death Tests And Threads` section below +explains why. + +If a test fixture class is shared by normal tests and death tests, you +can use typedef to introduce an alias for the fixture class and avoid +duplicating its code: +``` +class FooTest : public ::testing::Test { ... }; + +typedef FooTest FooDeathTest; + +TEST_F(FooTest, DoesThis) { + // normal test +} + +TEST_F(FooDeathTest, DoesThat) { + // death test +} +``` + +_Availability:_ Linux, Windows (requires MSVC 8.0 or above), Cygwin, and Mac (the latter three are supported since v1.3.0). `(ASSERT|EXPECT)_DEATH_IF_SUPPORTED` are new in v1.4.0. + +## Regular Expression Syntax ## + +On POSIX systems (e.g. Linux, Cygwin, and Mac), Google Test uses the +[POSIX extended regular expression](http://www.opengroup.org/onlinepubs/009695399/basedefs/xbd_chap09.html#tag_09_04) +syntax in death tests. To learn about this syntax, you may want to read this [Wikipedia entry](http://en.wikipedia.org/wiki/Regular_expression#POSIX_Extended_Regular_Expressions). + +On Windows, Google Test uses its own simple regular expression +implementation. It lacks many features you can find in POSIX extended +regular expressions. For example, we don't support union (`"x|y"`), +grouping (`"(xy)"`), brackets (`"[xy]"`), and repetition count +(`"x{5,7}"`), among others. Below is what we do support (`A` denotes a +literal character, period (`.`), or a single `\\` escape sequence; `x` +and `y` denote regular expressions.): + +| `c` | matches any literal character `c` | +|:----|:----------------------------------| +| `\\d` | matches any decimal digit | +| `\\D` | matches any character that's not a decimal digit | +| `\\f` | matches `\f` | +| `\\n` | matches `\n` | +| `\\r` | matches `\r` | +| `\\s` | matches any ASCII whitespace, including `\n` | +| `\\S` | matches any character that's not a whitespace | +| `\\t` | matches `\t` | +| `\\v` | matches `\v` | +| `\\w` | matches any letter, `_`, or decimal digit | +| `\\W` | matches any character that `\\w` doesn't match | +| `\\c` | matches any literal character `c`, which must be a punctuation | +| `.` | matches any single character except `\n` | +| `A?` | matches 0 or 1 occurrences of `A` | +| `A*` | matches 0 or many occurrences of `A` | +| `A+` | matches 1 or many occurrences of `A` | +| `^` | matches the beginning of a string (not that of each line) | +| `$` | matches the end of a string (not that of each line) | +| `xy` | matches `x` followed by `y` | + +To help you determine which capability is available on your system, +Google Test defines macro `GTEST_USES_POSIX_RE=1` when it uses POSIX +extended regular expressions, or `GTEST_USES_SIMPLE_RE=1` when it uses +the simple version. If you want your death tests to work in both +cases, you can either `#if` on these macros or use the more limited +syntax only. + +## How It Works ## + +Under the hood, `ASSERT_EXIT()` spawns a new process and executes the +death test statement in that process. The details of of how precisely +that happens depend on the platform and the variable +`::testing::GTEST_FLAG(death_test_style)` (which is initialized from the +command-line flag `--gtest_death_test_style`). + + * On POSIX systems, `fork()` (or `clone()` on Linux) is used to spawn the child, after which: + * If the variable's value is `"fast"`, the death test statement is immediately executed. + * If the variable's value is `"threadsafe"`, the child process re-executes the unit test binary just as it was originally invoked, but with some extra flags to cause just the single death test under consideration to be run. + * On Windows, the child is spawned using the `CreateProcess()` API, and re-executes the binary to cause just the single death test under consideration to be run - much like the `threadsafe` mode on POSIX. + +Other values for the variable are illegal and will cause the death test to +fail. Currently, the flag's default value is `"fast"`. However, we reserve the +right to change it in the future. Therefore, your tests should not depend on +this. + +In either case, the parent process waits for the child process to complete, and checks that + + 1. the child's exit status satisfies the predicate, and + 1. the child's stderr matches the regular expression. + +If the death test statement runs to completion without dying, the child +process will nonetheless terminate, and the assertion fails. + +## Death Tests And Threads ## + +The reason for the two death test styles has to do with thread safety. Due to +well-known problems with forking in the presence of threads, death tests should +be run in a single-threaded context. Sometimes, however, it isn't feasible to +arrange that kind of environment. For example, statically-initialized modules +may start threads before main is ever reached. Once threads have been created, +it may be difficult or impossible to clean them up. + +Google Test has three features intended to raise awareness of threading issues. + + 1. A warning is emitted if multiple threads are running when a death test is encountered. + 1. Test cases with a name ending in "DeathTest" are run before all other tests. + 1. It uses `clone()` instead of `fork()` to spawn the child process on Linux (`clone()` is not available on Cygwin and Mac), as `fork()` is more likely to cause the child to hang when the parent process has multiple threads. + +It's perfectly fine to create threads inside a death test statement; they are +executed in a separate process and cannot affect the parent. + +## Death Test Styles ## + +The "threadsafe" death test style was introduced in order to help mitigate the +risks of testing in a possibly multithreaded environment. It trades increased +test execution time (potentially dramatically so) for improved thread safety. +We suggest using the faster, default "fast" style unless your test has specific +problems with it. + +You can choose a particular style of death tests by setting the flag +programmatically: + +``` +::testing::FLAGS_gtest_death_test_style = "threadsafe"; +``` + +You can do this in `main()` to set the style for all death tests in the +binary, or in individual tests. Recall that flags are saved before running each +test and restored afterwards, so you need not do that yourself. For example: + +``` +TEST(MyDeathTest, TestOne) { + ::testing::FLAGS_gtest_death_test_style = "threadsafe"; + // This test is run in the "threadsafe" style: + ASSERT_DEATH(ThisShouldDie(), ""); +} + +TEST(MyDeathTest, TestTwo) { + // This test is run in the "fast" style: + ASSERT_DEATH(ThisShouldDie(), ""); +} + +int main(int argc, char** argv) { + ::testing::InitGoogleTest(&argc, argv); + ::testing::FLAGS_gtest_death_test_style = "fast"; + return RUN_ALL_TESTS(); +} +``` + +## Caveats ## + +The _statement_ argument of `ASSERT_EXIT()` can be any valid C++ statement +except that it can not return from the current function. This means +_statement_ should not contain `return` or a macro that might return (e.g. +`ASSERT_TRUE()` ). If _statement_ returns before it crashes, Google Test will +print an error message, and the test will fail. + +Since _statement_ runs in the child process, any in-memory side effect (e.g. +modifying a variable, releasing memory, etc) it causes will _not_ be observable +in the parent process. In particular, if you release memory in a death test, +your program will fail the heap check as the parent process will never see the +memory reclaimed. To solve this problem, you can + + 1. try not to free memory in a death test; + 1. free the memory again in the parent process; or + 1. do not use the heap checker in your program. + +Due to an implementation detail, you cannot place multiple death test +assertions on the same line; otherwise, compilation will fail with an unobvious +error message. + +Despite the improved thread safety afforded by the "threadsafe" style of death +test, thread problems such as deadlock are still possible in the presence of +handlers registered with `pthread_atfork(3)`. + +# Using Assertions in Sub-routines # + +## Adding Traces to Assertions ## + +If a test sub-routine is called from several places, when an assertion +inside it fails, it can be hard to tell which invocation of the +sub-routine the failure is from. You can alleviate this problem using +extra logging or custom failure messages, but that usually clutters up +your tests. A better solution is to use the `SCOPED_TRACE` macro: + +| `SCOPED_TRACE(`_message_`);` | +|:-----------------------------| + +where _message_ can be anything streamable to `std::ostream`. This +macro will cause the current file name, line number, and the given +message to be added in every failure message. The effect will be +undone when the control leaves the current lexical scope. + +For example, + +``` +10: void Sub1(int n) { +11: EXPECT_EQ(1, Bar(n)); +12: EXPECT_EQ(2, Bar(n + 1)); +13: } +14: +15: TEST(FooTest, Bar) { +16: { +17: SCOPED_TRACE("A"); // This trace point will be included in +18: // every failure in this scope. +19: Sub1(1); +20: } +21: // Now it won't. +22: Sub1(9); +23: } +``` + +could result in messages like these: + +``` +path/to/foo_test.cc:11: Failure +Value of: Bar(n) +Expected: 1 + Actual: 2 + Trace: +path/to/foo_test.cc:17: A + +path/to/foo_test.cc:12: Failure +Value of: Bar(n + 1) +Expected: 2 + Actual: 3 +``` + +Without the trace, it would've been difficult to know which invocation +of `Sub1()` the two failures come from respectively. (You could add an +extra message to each assertion in `Sub1()` to indicate the value of +`n`, but that's tedious.) + +Some tips on using `SCOPED_TRACE`: + + 1. With a suitable message, it's often enough to use `SCOPED_TRACE` at the beginning of a sub-routine, instead of at each call site. + 1. When calling sub-routines inside a loop, make the loop iterator part of the message in `SCOPED_TRACE` such that you can know which iteration the failure is from. + 1. Sometimes the line number of the trace point is enough for identifying the particular invocation of a sub-routine. In this case, you don't have to choose a unique message for `SCOPED_TRACE`. You can simply use `""`. + 1. You can use `SCOPED_TRACE` in an inner scope when there is one in the outer scope. In this case, all active trace points will be included in the failure messages, in reverse order they are encountered. + 1. The trace dump is clickable in Emacs' compilation buffer - hit return on a line number and you'll be taken to that line in the source file! + +_Availability:_ Linux, Windows, Mac. + +## Propagating Fatal Failures ## + +A common pitfall when using `ASSERT_*` and `FAIL*` is not understanding that +when they fail they only abort the _current function_, not the entire test. For +example, the following test will segfault: +``` +void Subroutine() { + // Generates a fatal failure and aborts the current function. + ASSERT_EQ(1, 2); + // The following won't be executed. + ... +} + +TEST(FooTest, Bar) { + Subroutine(); + // The intended behavior is for the fatal failure + // in Subroutine() to abort the entire test. + // The actual behavior: the function goes on after Subroutine() returns. + int* p = NULL; + *p = 3; // Segfault! +} +``` + +Since we don't use exceptions, it is technically impossible to +implement the intended behavior here. To alleviate this, Google Test +provides two solutions. You could use either the +`(ASSERT|EXPECT)_NO_FATAL_FAILURE` assertions or the +`HasFatalFailure()` function. They are described in the following two +subsections. + + + +### Asserting on Subroutines ### + +As shown above, if your test calls a subroutine that has an `ASSERT_*` +failure in it, the test will continue after the subroutine +returns. This may not be what you want. + +Often people want fatal failures to propagate like exceptions. For +that Google Test offers the following macros: + +| **Fatal assertion** | **Nonfatal assertion** | **Verifies** | +|:--------------------|:-----------------------|:-------------| +| `ASSERT_NO_FATAL_FAILURE(`_statement_`);` | `EXPECT_NO_FATAL_FAILURE(`_statement_`);` | _statement_ doesn't generate any new fatal failures in the current thread. | + +Only failures in the thread that executes the assertion are checked to +determine the result of this type of assertions. If _statement_ +creates new threads, failures in these threads are ignored. + +Examples: + +``` +ASSERT_NO_FATAL_FAILURE(Foo()); + +int i; +EXPECT_NO_FATAL_FAILURE({ + i = Bar(); +}); +``` + +_Availability:_ Linux, Windows, Mac. Assertions from multiple threads +are currently not supported. + +### Checking for Failures in the Current Test ### + +`HasFatalFailure()` in the `::testing::Test` class returns `true` if an +assertion in the current test has suffered a fatal failure. This +allows functions to catch fatal failures in a sub-routine and return +early. + +``` +class Test { + public: + ... + static bool HasFatalFailure(); +}; +``` + +The typical usage, which basically simulates the behavior of a thrown +exception, is: + +``` +TEST(FooTest, Bar) { + Subroutine(); + // Aborts if Subroutine() had a fatal failure. + if (HasFatalFailure()) + return; + // The following won't be executed. + ... +} +``` + +If `HasFatalFailure()` is used outside of `TEST()` , `TEST_F()` , or a test +fixture, you must add the `::testing::Test::` prefix, as in: + +``` +if (::testing::Test::HasFatalFailure()) + return; +``` + +Similarly, `HasNonfatalFailure()` returns `true` if the current test +has at least one non-fatal failure, and `HasFailure()` returns `true` +if the current test has at least one failure of either kind. + +_Availability:_ Linux, Windows, Mac. `HasNonfatalFailure()` and +`HasFailure()` are available since version 1.4.0. + +# Logging Additional Information # + +In your test code, you can call `RecordProperty("key", value)` to log +additional information, where `value` can be either a C string or a 32-bit +integer. The _last_ value recorded for a key will be emitted to the XML output +if you specify one. For example, the test + +``` +TEST_F(WidgetUsageTest, MinAndMaxWidgets) { + RecordProperty("MaximumWidgets", ComputeMaxUsage()); + RecordProperty("MinimumWidgets", ComputeMinUsage()); +} +``` + +will output XML like this: + +``` +... + <testcase name="MinAndMaxWidgets" status="run" time="6" classname="WidgetUsageTest" + MaximumWidgets="12" + MinimumWidgets="9" /> +... +``` + +_Note_: + * `RecordProperty()` is a static member of the `Test` class. Therefore it needs to be prefixed with `::testing::Test::` if used outside of the `TEST` body and the test fixture class. + * `key` must be a valid XML attribute name, and cannot conflict with the ones already used by Google Test (`name`, `status`, `time`, and `classname`). + +_Availability_: Linux, Windows, Mac. + +# Sharing Resources Between Tests in the Same Test Case # + + + +Google Test creates a new test fixture object for each test in order to make +tests independent and easier to debug. However, sometimes tests use resources +that are expensive to set up, making the one-copy-per-test model prohibitively +expensive. + +If the tests don't change the resource, there's no harm in them sharing a +single resource copy. So, in addition to per-test set-up/tear-down, Google Test +also supports per-test-case set-up/tear-down. To use it: + + 1. In your test fixture class (say `FooTest` ), define as `static` some member variables to hold the shared resources. + 1. In the same test fixture class, define a `static void SetUpTestCase()` function (remember not to spell it as **`SetupTestCase`** with a small `u`!) to set up the shared resources and a `static void TearDownTestCase()` function to tear them down. + +That's it! Google Test automatically calls `SetUpTestCase()` before running the +_first test_ in the `FooTest` test case (i.e. before creating the first +`FooTest` object), and calls `TearDownTestCase()` after running the _last test_ +in it (i.e. after deleting the last `FooTest` object). In between, the tests +can use the shared resources. + +Remember that the test order is undefined, so your code can't depend on a test +preceding or following another. Also, the tests must either not modify the +state of any shared resource, or, if they do modify the state, they must +restore the state to its original value before passing control to the next +test. + +Here's an example of per-test-case set-up and tear-down: +``` +class FooTest : public ::testing::Test { + protected: + // Per-test-case set-up. + // Called before the first test in this test case. + // Can be omitted if not needed. + static void SetUpTestCase() { + shared_resource_ = new ...; + } + + // Per-test-case tear-down. + // Called after the last test in this test case. + // Can be omitted if not needed. + static void TearDownTestCase() { + delete shared_resource_; + shared_resource_ = NULL; + } + + // You can define per-test set-up and tear-down logic as usual. + virtual void SetUp() { ... } + virtual void TearDown() { ... } + + // Some expensive resource shared by all tests. + static T* shared_resource_; +}; + +T* FooTest::shared_resource_ = NULL; + +TEST_F(FooTest, Test1) { + ... you can refer to shared_resource here ... +} +TEST_F(FooTest, Test2) { + ... you can refer to shared_resource here ... +} +``` + +_Availability:_ Linux, Windows, Mac. + +# Global Set-Up and Tear-Down # + +Just as you can do set-up and tear-down at the test level and the test case +level, you can also do it at the test program level. Here's how. + +First, you subclass the `::testing::Environment` class to define a test +environment, which knows how to set-up and tear-down: + +``` +class Environment { + public: + virtual ~Environment() {} + // Override this to define how to set up the environment. + virtual void SetUp() {} + // Override this to define how to tear down the environment. + virtual void TearDown() {} +}; +``` + +Then, you register an instance of your environment class with Google Test by +calling the `::testing::AddGlobalTestEnvironment()` function: + +``` +Environment* AddGlobalTestEnvironment(Environment* env); +``` + +Now, when `RUN_ALL_TESTS()` is called, it first calls the `SetUp()` method of +the environment object, then runs the tests if there was no fatal failures, and +finally calls `TearDown()` of the environment object. + +It's OK to register multiple environment objects. In this case, their `SetUp()` +will be called in the order they are registered, and their `TearDown()` will be +called in the reverse order. + +Note that Google Test takes ownership of the registered environment objects. +Therefore **do not delete them** by yourself. + +You should call `AddGlobalTestEnvironment()` before `RUN_ALL_TESTS()` is +called, probably in `main()`. If you use `gtest_main`, you need to call +this before `main()` starts for it to take effect. One way to do this is to +define a global variable like this: + +``` +::testing::Environment* const foo_env = ::testing::AddGlobalTestEnvironment(new FooEnvironment); +``` + +However, we strongly recommend you to write your own `main()` and call +`AddGlobalTestEnvironment()` there, as relying on initialization of global +variables makes the code harder to read and may cause problems when you +register multiple environments from different translation units and the +environments have dependencies among them (remember that the compiler doesn't +guarantee the order in which global variables from different translation units +are initialized). + +_Availability:_ Linux, Windows, Mac. + + +# Value Parameterized Tests # + +_Value-parameterized tests_ allow you to test your code with different +parameters without writing multiple copies of the same test. + +Suppose you write a test for your code and then realize that your code is affected by a presence of a Boolean command line flag. + +``` +TEST(MyCodeTest, TestFoo) { + // A code to test foo(). +} +``` + +Usually people factor their test code into a function with a Boolean parameter in such situations. The function sets the flag, then executes the testing code. + +``` +void TestFooHelper(bool flag_value) { + flag = flag_value; + // A code to test foo(). +} + +TEST(MyCodeTest, TestFooo) { + TestFooHelper(false); + TestFooHelper(true); +} +``` + +But this setup has serious drawbacks. First, when a test assertion fails in your tests, it becomes unclear what value of the parameter caused it to fail. You can stream a clarifying message into your `EXPECT`/`ASSERT` statements, but it you'll have to do it with all of them. Second, you have to add one such helper function per test. What if you have ten tests? Twenty? A hundred? + +Value-parameterized tests will let you write your test only once and then easily instantiate and run it with an arbitrary number of parameter values. + +Here are some other situations when value-parameterized tests come handy: + + * You wan to test different implementations of an OO interface. + * You want to test your code over various inputs (a.k.a. data-driven testing). This feature is easy to abuse, so please exercise your good sense when doing it! + +## How to Write Value-Parameterized Tests ## + +To write value-parameterized tests, first you should define a fixture +class. It must be derived from `::testing::TestWithParam<T>`, where `T` +is the type of your parameter values. `TestWithParam<T>` is itself +derived from `::testing::Test`. `T` can be any copyable type. If it's +a raw pointer, you are responsible for managing the lifespan of the +pointed values. + +``` +class FooTest : public ::testing::TestWithParam<const char*> { + // You can implement all the usual fixture class members here. + // To access the test parameter, call GetParam() from class + // TestWithParam<T>. +}; +``` + +Then, use the `TEST_P` macro to define as many test patterns using +this fixture as you want. The `_P` suffix is for "parameterized" or +"pattern", whichever you prefer to think. + +``` +TEST_P(FooTest, DoesBlah) { + // Inside a test, access the test parameter with the GetParam() method + // of the TestWithParam<T> class: + EXPECT_TRUE(foo.Blah(GetParam())); + ... +} + +TEST_P(FooTest, HasBlahBlah) { + ... +} +``` + +Finally, you can use `INSTANTIATE_TEST_CASE_P` to instantiate the test +case with any set of parameters you want. Google Test defines a number of +functions for generating test parameters. They return what we call +(surprise!) _parameter generators_. Here is a summary of them, +which are all in the `testing` namespace: + +| `Range(begin, end[, step])` | Yields values `{begin, begin+step, begin+step+step, ...}`. The values do not include `end`. `step` defaults to 1. | +|:----------------------------|:------------------------------------------------------------------------------------------------------------------| +| `Values(v1, v2, ..., vN)` | Yields values `{v1, v2, ..., vN}`. | +| `ValuesIn(container)` and `ValuesIn(begin, end)` | Yields values from a C-style array, an STL-style container, or an iterator range `[begin, end)`. | +| `Bool()` | Yields sequence `{false, true}`. | +| `Combine(g1, g2, ..., gN)` | Yields all combinations (the Cartesian product for the math savvy) of the values generated by the `N` generators. This is only available if your system provides the `<tr1/tuple>` header. If you are sure your system does, and Google Test disagrees, you can override it by defining `GTEST_HAS_TR1_TUPLE=1`. See comments in [include/gtest/internal/gtest-port.h](../include/gtest/internal/gtest-port.h) for more information. | + +For more details, see the comments at the definitions of these functions in the [source code](../include/gtest/gtest-param-test.h). + +The following statement will instantiate tests from the `FooTest` test case +each with parameter values `"meeny"`, `"miny"`, and `"moe"`. + +``` +INSTANTIATE_TEST_CASE_P(InstantiationName, + FooTest, + ::testing::Values("meeny", "miny", "moe")); +``` + +To distinguish different instances of the pattern (yes, you can +instantiate it more than once), the first argument to +`INSTANTIATE_TEST_CASE_P` is a prefix that will be added to the actual +test case name. Remember to pick unique prefixes for different +instantiations. The tests from the instantiation above will have these +names: + + * `InstantiationName/FooTest.DoesBlah/0` for `"meeny"` + * `InstantiationName/FooTest.DoesBlah/1` for `"miny"` + * `InstantiationName/FooTest.DoesBlah/2` for `"moe"` + * `InstantiationName/FooTest.HasBlahBlah/0` for `"meeny"` + * `InstantiationName/FooTest.HasBlahBlah/1` for `"miny"` + * `InstantiationName/FooTest.HasBlahBlah/2` for `"moe"` + +You can use these names in [--gtest\-filter](#running-a-subset-of-the-tests). + +This statement will instantiate all tests from `FooTest` again, each +with parameter values `"cat"` and `"dog"`: + +``` +const char* pets[] = {"cat", "dog"}; +INSTANTIATE_TEST_CASE_P(AnotherInstantiationName, FooTest, + ::testing::ValuesIn(pets)); +``` + +The tests from the instantiation above will have these names: + + * `AnotherInstantiationName/FooTest.DoesBlah/0` for `"cat"` + * `AnotherInstantiationName/FooTest.DoesBlah/1` for `"dog"` + * `AnotherInstantiationName/FooTest.HasBlahBlah/0` for `"cat"` + * `AnotherInstantiationName/FooTest.HasBlahBlah/1` for `"dog"` + +Please note that `INSTANTIATE_TEST_CASE_P` will instantiate _all_ +tests in the given test case, whether their definitions come before or +_after_ the `INSTANTIATE_TEST_CASE_P` statement. + +You can see +[these](../samples/sample7_unittest.cc) +[files](../samples/sample8_unittest.cc) for more examples. + +_Availability_: Linux, Windows (requires MSVC 8.0 or above), Mac; since version 1.2.0. + +## Creating Value-Parameterized Abstract Tests ## + +In the above, we define and instantiate `FooTest` in the same source +file. Sometimes you may want to define value-parameterized tests in a +library and let other people instantiate them later. This pattern is +known as <i>abstract tests</i>. As an example of its application, when you +are designing an interface you can write a standard suite of abstract +tests (perhaps using a factory function as the test parameter) that +all implementations of the interface are expected to pass. When +someone implements the interface, he can instantiate your suite to get +all the interface-conformance tests for free. + +To define abstract tests, you should organize your code like this: + + 1. Put the definition of the parameterized test fixture class (e.g. `FooTest`) in a header file, say `foo_param_test.h`. Think of this as _declaring_ your abstract tests. + 1. Put the `TEST_P` definitions in `foo_param_test.cc`, which includes `foo_param_test.h`. Think of this as _implementing_ your abstract tests. + +Once they are defined, you can instantiate them by including +`foo_param_test.h`, invoking `INSTANTIATE_TEST_CASE_P()`, and linking +with `foo_param_test.cc`. You can instantiate the same abstract test +case multiple times, possibly in different source files. + +# Typed Tests # + +Suppose you have multiple implementations of the same interface and +want to make sure that all of them satisfy some common requirements. +Or, you may have defined several types that are supposed to conform to +the same "concept" and you want to verify it. In both cases, you want +the same test logic repeated for different types. + +While you can write one `TEST` or `TEST_F` for each type you want to +test (and you may even factor the test logic into a function template +that you invoke from the `TEST`), it's tedious and doesn't scale: +if you want _m_ tests over _n_ types, you'll end up writing _m\*n_ +`TEST`s. + +_Typed tests_ allow you to repeat the same test logic over a list of +types. You only need to write the test logic once, although you must +know the type list when writing typed tests. Here's how you do it: + +First, define a fixture class template. It should be parameterized +by a type. Remember to derive it from `::testing::Test`: + +``` +template <typename T> +class FooTest : public ::testing::Test { + public: + ... + typedef std::list<T> List; + static T shared_; + T value_; +}; +``` + +Next, associate a list of types with the test case, which will be +repeated for each type in the list: + +``` +typedef ::testing::Types<char, int, unsigned int> MyTypes; +TYPED_TEST_CASE(FooTest, MyTypes); +``` + +The `typedef` is necessary for the `TYPED_TEST_CASE` macro to parse +correctly. Otherwise the compiler will think that each comma in the +type list introduces a new macro argument. + +Then, use `TYPED_TEST()` instead of `TEST_F()` to define a typed test +for this test case. You can repeat this as many times as you want: + +``` +TYPED_TEST(FooTest, DoesBlah) { + // Inside a test, refer to the special name TypeParam to get the type + // parameter. Since we are inside a derived class template, C++ requires + // us to visit the members of FooTest via 'this'. + TypeParam n = this->value_; + + // To visit static members of the fixture, add the 'TestFixture::' + // prefix. + n += TestFixture::shared_; + + // To refer to typedefs in the fixture, add the 'typename TestFixture::' + // prefix. The 'typename' is required to satisfy the compiler. + typename TestFixture::List values; + values.push_back(n); + ... +} + +TYPED_TEST(FooTest, HasPropertyA) { ... } +``` + +You can see `samples/sample6_unittest.cc` for a complete example. + +_Availability:_ Linux, Windows (requires MSVC 8.0 or above), Mac; +since version 1.1.0. + +# Type-Parameterized Tests # + +_Type-parameterized tests_ are like typed tests, except that they +don't require you to know the list of types ahead of time. Instead, +you can define the test logic first and instantiate it with different +type lists later. You can even instantiate it more than once in the +same program. + +If you are designing an interface or concept, you can define a suite +of type-parameterized tests to verify properties that any valid +implementation of the interface/concept should have. Then, the author +of each implementation can just instantiate the test suite with his +type to verify that it conforms to the requirements, without having to +write similar tests repeatedly. Here's an example: + +First, define a fixture class template, as we did with typed tests: + +``` +template <typename T> +class FooTest : public ::testing::Test { + ... +}; +``` + +Next, declare that you will define a type-parameterized test case: + +``` +TYPED_TEST_CASE_P(FooTest); +``` + +The `_P` suffix is for "parameterized" or "pattern", whichever you +prefer to think. + +Then, use `TYPED_TEST_P()` to define a type-parameterized test. You +can repeat this as many times as you want: + +``` +TYPED_TEST_P(FooTest, DoesBlah) { + // Inside a test, refer to TypeParam to get the type parameter. + TypeParam n = 0; + ... +} + +TYPED_TEST_P(FooTest, HasPropertyA) { ... } +``` + +Now the tricky part: you need to register all test patterns using the +`REGISTER_TYPED_TEST_CASE_P` macro before you can instantiate them. +The first argument of the macro is the test case name; the rest are +the names of the tests in this test case: + +``` +REGISTER_TYPED_TEST_CASE_P(FooTest, + DoesBlah, HasPropertyA); +``` + +Finally, you are free to instantiate the pattern with the types you +want. If you put the above code in a header file, you can `#include` +it in multiple C++ source files and instantiate it multiple times. + +``` +typedef ::testing::Types<char, int, unsigned int> MyTypes; +INSTANTIATE_TYPED_TEST_CASE_P(My, FooTest, MyTypes); +``` + +To distinguish different instances of the pattern, the first argument +to the `INSTANTIATE_TYPED_TEST_CASE_P` macro is a prefix that will be +added to the actual test case name. Remember to pick unique prefixes +for different instances. + +In the special case where the type list contains only one type, you +can write that type directly without `::testing::Types<...>`, like this: + +``` +INSTANTIATE_TYPED_TEST_CASE_P(My, FooTest, int); +``` + +You can see `samples/sample6_unittest.cc` for a complete example. + +_Availability:_ Linux, Windows (requires MSVC 8.0 or above), Mac; +since version 1.1.0. + +# Testing Private Code # + +If you change your software's internal implementation, your tests should not +break as long as the change is not observable by users. Therefore, per the +_black-box testing principle_, most of the time you should test your code +through its public interfaces. + +If you still find yourself needing to test internal implementation code, +consider if there's a better design that wouldn't require you to do so. If you +absolutely have to test non-public interface code though, you can. There are +two cases to consider: + + * Static functions (_not_ the same as static member functions!) or unnamed namespaces, and + * Private or protected class members + +## Static Functions ## + +Both static functions and definitions/declarations in an unnamed namespace are +only visible within the same translation unit. To test them, you can `#include` +the entire `.cc` file being tested in your `*_test.cc` file. (`#include`ing `.cc` +files is not a good way to reuse code - you should not do this in production +code!) + +However, a better approach is to move the private code into the +`foo::internal` namespace, where `foo` is the namespace your project normally +uses, and put the private declarations in a `*-internal.h` file. Your +production `.cc` files and your tests are allowed to include this internal +header, but your clients are not. This way, you can fully test your internal +implementation without leaking it to your clients. + +## Private Class Members ## + +Private class members are only accessible from within the class or by friends. +To access a class' private members, you can declare your test fixture as a +friend to the class and define accessors in your fixture. Tests using the +fixture can then access the private members of your production class via the +accessors in the fixture. Note that even though your fixture is a friend to +your production class, your tests are not automatically friends to it, as they +are technically defined in sub-classes of the fixture. + +Another way to test private members is to refactor them into an implementation +class, which is then declared in a `*-internal.h` file. Your clients aren't +allowed to include this header but your tests can. Such is called the Pimpl +(Private Implementation) idiom. + +Or, you can declare an individual test as a friend of your class by adding this +line in the class body: + +``` +FRIEND_TEST(TestCaseName, TestName); +``` + +For example, +``` +// foo.h +#include <gtest/gtest_prod.h> + +// Defines FRIEND_TEST. +class Foo { + ... + private: + FRIEND_TEST(FooTest, BarReturnsZeroOnNull); + int Bar(void* x); +}; + +// foo_test.cc +... +TEST(FooTest, BarReturnsZeroOnNull) { + Foo foo; + EXPECT_EQ(0, foo.Bar(NULL)); + // Uses Foo's private member Bar(). +} +``` + +Pay special attention when your class is defined in a namespace, as you should +define your test fixtures and tests in the same namespace if you want them to +be friends of your class. For example, if the code to be tested looks like: + +``` +namespace my_namespace { + +class Foo { + friend class FooTest; + FRIEND_TEST(FooTest, Bar); + FRIEND_TEST(FooTest, Baz); + ... + definition of the class Foo + ... +}; + +} // namespace my_namespace +``` + +Your test code should be something like: + +``` +namespace my_namespace { +class FooTest : public ::testing::Test { + protected: + ... +}; + +TEST_F(FooTest, Bar) { ... } +TEST_F(FooTest, Baz) { ... } + +} // namespace my_namespace +``` + +# Catching Failures # + +If you are building a testing utility on top of Google Test, you'll +want to test your utility. What framework would you use to test it? +Google Test, of course. + +The challenge is to verify that your testing utility reports failures +correctly. In frameworks that report a failure by throwing an +exception, you could catch the exception and assert on it. But Google +Test doesn't use exceptions, so how do we test that a piece of code +generates an expected failure? + +`<gtest/gtest-spi.h>` contains some constructs to do this. After +`#include`ing this header, you can use + +| `EXPECT_FATAL_FAILURE(`_statement, substring_`);` | +|:--------------------------------------------------| + +to assert that _statement_ generates a fatal (e.g. `ASSERT_*`) failure +whose message contains the given _substring_, or use + +| `EXPECT_NONFATAL_FAILURE(`_statement, substring_`);` | +|:-----------------------------------------------------| + +if you are expecting a non-fatal (e.g. `EXPECT_*`) failure. + +For technical reasons, there are some caveats: + + 1. You cannot stream a failure message to either macro. + 1. _statement_ in `EXPECT_FATAL_FAILURE()` cannot reference local non-static variables or non-static members of `this` object. + 1. _statement_ in `EXPECT_FATAL_FAILURE()` cannot return a value. + +_Note:_ Google Test is designed with threads in mind. Once the +synchronization primitives in `<gtest/internal/gtest-port.h>` have +been implemented, Google Test will become thread-safe, meaning that +you can then use assertions in multiple threads concurrently. Before + +that, however, Google Test only supports single-threaded usage. Once +thread-safe, `EXPECT_FATAL_FAILURE()` and `EXPECT_NONFATAL_FAILURE()` +will capture failures in the current thread only. If _statement_ +creates new threads, failures in these threads will be ignored. If +you want to capture failures from all threads instead, you should use +the following macros: + +| `EXPECT_FATAL_FAILURE_ON_ALL_THREADS(`_statement, substring_`);` | +|:-----------------------------------------------------------------| +| `EXPECT_NONFATAL_FAILURE_ON_ALL_THREADS(`_statement, substring_`);` | + +# Getting the Current Test's Name # + +Sometimes a function may need to know the name of the currently running test. +For example, you may be using the `SetUp()` method of your test fixture to set +the golden file name based on which test is running. The `::testing::TestInfo` +class has this information: + +``` +namespace testing { + +class TestInfo { + public: + // Returns the test case name and the test name, respectively. + // + // Do NOT delete or free the return value - it's managed by the + // TestInfo class. + const char* test_case_name() const; + const char* name() const; +}; + +} // namespace testing +``` + + +> To obtain a `TestInfo` object for the currently running test, call +`current_test_info()` on the `UnitTest` singleton object: + +``` +// Gets information about the currently running test. +// Do NOT delete the returned object - it's managed by the UnitTest class. +const ::testing::TestInfo* const test_info = + ::testing::UnitTest::GetInstance()->current_test_info(); +printf("We are in test %s of test case %s.\n", + test_info->name(), test_info->test_case_name()); +``` + +`current_test_info()` returns a null pointer if no test is running. In +particular, you cannot find the test case name in `TestCaseSetUp()`, +`TestCaseTearDown()` (where you know the test case name implicitly), or +functions called from them. + +_Availability:_ Linux, Windows, Mac. + +# Extending Google Test by Handling Test Events # + +Google Test provides an <b>event listener API</b> to let you receive +notifications about the progress of a test program and test +failures. The events you can listen to include the start and end of +the test program, a test case, or a test method, among others. You may +use this API to augment or replace the standard console output, +replace the XML output, or provide a completely different form of +output, such as a GUI or a database. You can also use test events as +checkpoints to implement a resource leak checker, for example. + +_Availability:_ Linux, Windows, Mac; since v1.4.0. + +## Defining Event Listeners ## + +To define a event listener, you subclass either +[testing::TestEventListener](../include/gtest/gtest.h#L855) +or [testing::EmptyTestEventListener](../include/gtest/gtest.h#L905). +The former is an (abstract) interface, where <i>each pure virtual method<br> +can be overridden to handle a test event</i> (For example, when a test +starts, the `OnTestStart()` method will be called.). The latter provides +an empty implementation of all methods in the interface, such that a +subclass only needs to override the methods it cares about. + +When an event is fired, its context is passed to the handler function +as an argument. The following argument types are used: + * [UnitTest](../include/gtest/gtest.h#L1007) reflects the state of the entire test program, + * [TestCase](../include/gtest/gtest.h#L689) has information about a test case, which can contain one or more tests, + * [TestInfo](../include/gtest/gtest.h#L599) contains the state of a test, and + * [TestPartResult](../include/gtest/gtest-test-part.h#L42) represents the result of a test assertion. + +An event handler function can examine the argument it receives to find +out interesting information about the event and the test program's +state. Here's an example: + +``` + class MinimalistPrinter : public ::testing::EmptyTestEventListener { + // Called before a test starts. + virtual void OnTestStart(const ::testing::TestInfo& test_info) { + printf("*** Test %s.%s starting.\n", + test_info.test_case_name(), test_info.name()); + } + + // Called after a failed assertion or a SUCCESS(). + virtual void OnTestPartResult( + const ::testing::TestPartResult& test_part_result) { + printf("%s in %s:%d\n%s\n", + test_part_result.failed() ? "*** Failure" : "Success", + test_part_result.file_name(), + test_part_result.line_number(), + test_part_result.summary()); + } + + // Called after a test ends. + virtual void OnTestEnd(const ::testing::TestInfo& test_info) { + printf("*** Test %s.%s ending.\n", + test_info.test_case_name(), test_info.name()); + } + }; +``` + +## Using Event Listeners ## + +To use the event listener you have defined, add an instance of it to +the Google Test event listener list (represented by class +[TestEventListeners](../include/gtest/gtest.h#L929) +- note the "s" at the end of the name) in your +`main()` function, before calling `RUN_ALL_TESTS()`: +``` +int main(int argc, char** argv) { + ::testing::InitGoogleTest(&argc, argv); + // Gets hold of the event listener list. + ::testing::TestEventListeners& listeners = + ::testing::UnitTest::GetInstance()->listeners(); + // Adds a listener to the end. Google Test takes the ownership. + listeners.Append(new MinimalistPrinter); + return RUN_ALL_TESTS(); +} +``` + +There's only one problem: the default test result printer is still in +effect, so its output will mingle with the output from your minimalist +printer. To suppress the default printer, just release it from the +event listener list and delete it. You can do so by adding one line: +``` + ... + delete listeners.Release(listeners.default_result_printer()); + listeners.Append(new MinimalistPrinter); + return RUN_ALL_TESTS(); +``` + +Now, sit back and enjoy a completely different output from your +tests. For more details, you can read this +[sample](../samples/sample9_unittest.cc). + +You may append more than one listener to the list. When an `On*Start()` +or `OnTestPartResult()` event is fired, the listeners will receive it in +the order they appear in the list (since new listeners are added to +the end of the list, the default text printer and the default XML +generator will receive the event first). An `On*End()` event will be +received by the listeners in the _reverse_ order. This allows output by +listeners added later to be framed by output from listeners added +earlier. + +## Generating Failures in Listeners ## + +You may use failure-raising macros (`EXPECT_*()`, `ASSERT_*()`, +`FAIL()`, etc) when processing an event. There are some restrictions: + + 1. You cannot generate any failure in `OnTestPartResult()` (otherwise it will cause `OnTestPartResult()` to be called recursively). + 1. A listener that handles `OnTestPartResult()` is not allowed to generate any failure. + +When you add listeners to the listener list, you should put listeners +that handle `OnTestPartResult()` _before_ listeners that can generate +failures. This ensures that failures generated by the latter are +attributed to the right test by the former. + +We have a sample of failure-raising listener +[here](../samples/sample10_unittest.cc). + +# Running Test Programs: Advanced Options # + +Google Test test programs are ordinary executables. Once built, you can run +them directly and affect their behavior via the following environment variables +and/or command line flags. For the flags to work, your programs must call +`::testing::InitGoogleTest()` before calling `RUN_ALL_TESTS()`. + +To see a list of supported flags and their usage, please run your test +program with the `--help` flag. You can also use `-h`, `-?`, or `/?` +for short. This feature is added in version 1.3.0. + +If an option is specified both by an environment variable and by a +flag, the latter takes precedence. Most of the options can also be +set/read in code: to access the value of command line flag +`--gtest_foo`, write `::testing::GTEST_FLAG(foo)`. A common pattern is +to set the value of a flag before calling `::testing::InitGoogleTest()` +to change the default value of the flag: +``` +int main(int argc, char** argv) { + // Disables elapsed time by default. + ::testing::GTEST_FLAG(print_time) = false; + + // This allows the user to override the flag on the command line. + ::testing::InitGoogleTest(&argc, argv); + + return RUN_ALL_TESTS(); +} +``` + +## Selecting Tests ## + +This section shows various options for choosing which tests to run. + +### Listing Test Names ### + +Sometimes it is necessary to list the available tests in a program before +running them so that a filter may be applied if needed. Including the flag +`--gtest_list_tests` overrides all other flags and lists tests in the following +format: +``` +TestCase1. + TestName1 + TestName2 +TestCase2. + TestName +``` + +None of the tests listed are actually run if the flag is provided. There is no +corresponding environment variable for this flag. + +_Availability:_ Linux, Windows, Mac. + +### Running a Subset of the Tests ### + +By default, a Google Test program runs all tests the user has defined. +Sometimes, you want to run only a subset of the tests (e.g. for debugging or +quickly verifying a change). If you set the `GTEST_FILTER` environment variable +or the `--gtest_filter` flag to a filter string, Google Test will only run the +tests whose full names (in the form of `TestCaseName.TestName`) match the +filter. + +The format of a filter is a '`:`'-separated list of wildcard patterns (called +the positive patterns) optionally followed by a '`-`' and another +'`:`'-separated pattern list (called the negative patterns). A test matches the +filter if and only if it matches any of the positive patterns but does not +match any of the negative patterns. + +A pattern may contain `'*'` (matches any string) or `'?'` (matches any single +character). For convenience, the filter `'*-NegativePatterns'` can be also +written as `'-NegativePatterns'`. + +For example: + + * `./foo_test` Has no flag, and thus runs all its tests. + * `./foo_test --gtest_filter=*` Also runs everything, due to the single match-everything `*` value. + * `./foo_test --gtest_filter=FooTest.*` Runs everything in test case `FooTest`. + * `./foo_test --gtest_filter=*Null*:*Constructor*` Runs any test whose full name contains either `"Null"` or `"Constructor"`. + * `./foo_test --gtest_filter=-*DeathTest.*` Runs all non-death tests. + * `./foo_test --gtest_filter=FooTest.*-FooTest.Bar` Runs everything in test case `FooTest` except `FooTest.Bar`. + +_Availability:_ Linux, Windows, Mac. + +### Temporarily Disabling Tests ### + +If you have a broken test that you cannot fix right away, you can add the +`DISABLED_` prefix to its name. This will exclude it from execution. This is +better than commenting out the code or using `#if 0`, as disabled tests are +still compiled (and thus won't rot). + +If you need to disable all tests in a test case, you can either add `DISABLED_` +to the front of the name of each test, or alternatively add it to the front of +the test case name. + +For example, the following tests won't be run by Google Test, even though they +will still be compiled: + +``` +// Tests that Foo does Abc. +TEST(FooTest, DISABLED_DoesAbc) { ... } + +class DISABLED_BarTest : public ::testing::Test { ... }; + +// Tests that Bar does Xyz. +TEST_F(DISABLED_BarTest, DoesXyz) { ... } +``` + +_Note:_ This feature should only be used for temporary pain-relief. You still +have to fix the disabled tests at a later date. As a reminder, Google Test will +print a banner warning you if a test program contains any disabled tests. + +_Tip:_ You can easily count the number of disabled tests you have +using `grep`. This number can be used as a metric for improving your +test quality. + +_Availability:_ Linux, Windows, Mac. + +### Temporarily Enabling Disabled Tests ### + +To include [disabled tests](#temporarily-disabling-tests) in test +execution, just invoke the test program with the +`--gtest_also_run_disabled_tests` flag or set the +`GTEST_ALSO_RUN_DISABLED_TESTS` environment variable to a value other +than `0`. You can combine this with the +[--gtest\_filter](#running-a-subset-of-the-tests) flag to further select +which disabled tests to run. + +_Availability:_ Linux, Windows, Mac; since version 1.3.0. + +## Repeating the Tests ## + +Once in a while you'll run into a test whose result is hit-or-miss. Perhaps it +will fail only 1% of the time, making it rather hard to reproduce the bug under +a debugger. This can be a major source of frustration. + +The `--gtest_repeat` flag allows you to repeat all (or selected) test methods +in a program many times. Hopefully, a flaky test will eventually fail and give +you a chance to debug. Here's how to use it: + +| `$ foo_test --gtest_repeat=1000` | Repeat foo\_test 1000 times and don't stop at failures. | +|:---------------------------------|:--------------------------------------------------------| +| `$ foo_test --gtest_repeat=-1` | A negative count means repeating forever. | +| `$ foo_test --gtest_repeat=1000 --gtest_break_on_failure` | Repeat foo\_test 1000 times, stopping at the first failure. This is especially useful when running under a debugger: when the testfails, it will drop into the debugger and you can then inspect variables and stacks. | +| `$ foo_test --gtest_repeat=1000 --gtest_filter=FooBar` | Repeat the tests whose name matches the filter 1000 times. | + +If your test program contains global set-up/tear-down code registered +using `AddGlobalTestEnvironment()`, it will be repeated in each +iteration as well, as the flakiness may be in it. You can also specify +the repeat count by setting the `GTEST_REPEAT` environment variable. + +_Availability:_ Linux, Windows, Mac. + +## Shuffling the Tests ## + +You can specify the `--gtest_shuffle` flag (or set the `GTEST_SHUFFLE` +environment variable to `1`) to run the tests in a program in a random +order. This helps to reveal bad dependencies between tests. + +By default, Google Test uses a random seed calculated from the current +time. Therefore you'll get a different order every time. The console +output includes the random seed value, such that you can reproduce an +order-related test failure later. To specify the random seed +explicitly, use the `--gtest_random_seed=SEED` flag (or set the +`GTEST_RANDOM_SEED` environment variable), where `SEED` is an integer +between 0 and 99999. The seed value 0 is special: it tells Google Test +to do the default behavior of calculating the seed from the current +time. + +If you combine this with `--gtest_repeat=N`, Google Test will pick a +different random seed and re-shuffle the tests in each iteration. + +_Availability:_ Linux, Windows, Mac; since v1.4.0. + +## Controlling Test Output ## + +This section teaches how to tweak the way test results are reported. + +### Colored Terminal Output ### + +Google Test can use colors in its terminal output to make it easier to spot +the separation between tests, and whether tests passed. + +You can set the GTEST\_COLOR environment variable or set the `--gtest_color` +command line flag to `yes`, `no`, or `auto` (the default) to enable colors, +disable colors, or let Google Test decide. When the value is `auto`, Google +Test will use colors if and only if the output goes to a terminal and (on +non-Windows platforms) the `TERM` environment variable is set to `xterm` or +`xterm-color`. + +_Availability:_ Linux, Windows, Mac. + +### Suppressing the Elapsed Time ### + +By default, Google Test prints the time it takes to run each test. To +suppress that, run the test program with the `--gtest_print_time=0` +command line flag. Setting the `GTEST_PRINT_TIME` environment +variable to `0` has the same effect. + +_Availability:_ Linux, Windows, Mac. (In Google Test 1.3.0 and lower, +the default behavior is that the elapsed time is **not** printed.) + +### Generating an XML Report ### + +Google Test can emit a detailed XML report to a file in addition to its normal +textual output. The report contains the duration of each test, and thus can +help you identify slow tests. + +To generate the XML report, set the `GTEST_OUTPUT` environment variable or the +`--gtest_output` flag to the string `"xml:_path_to_output_file_"`, which will +create the file at the given location. You can also just use the string +`"xml"`, in which case the output can be found in the `test_detail.xml` file in +the current directory. + +If you specify a directory (for example, `"xml:output/directory/"` on Linux or +`"xml:output\directory\"` on Windows), Google Test will create the XML file in +that directory, named after the test executable (e.g. `foo_test.xml` for test +program `foo_test` or `foo_test.exe`). If the file already exists (perhaps left +over from a previous run), Google Test will pick a different name (e.g. +`foo_test_1.xml`) to avoid overwriting it. + +The report uses the format described here. It is based on the +`junitreport` Ant task and can be parsed by popular continuous build +systems like [Hudson](https://hudson.dev.java.net/). Since that format +was originally intended for Java, a little interpretation is required +to make it apply to Google Test tests, as shown here: + +``` +<testsuites name="AllTests" ...> + <testsuite name="test_case_name" ...> + <testcase name="test_name" ...> + <failure message="..."/> + <failure message="..."/> + <failure message="..."/> + </testcase> + </testsuite> +</testsuites> +``` + + * The root `<testsuites>` element corresponds to the entire test program. + * `<testsuite>` elements correspond to Google Test test cases. + * `<testcase>` elements correspond to Google Test test functions. + +For instance, the following program + +``` +TEST(MathTest, Addition) { ... } +TEST(MathTest, Subtraction) { ... } +TEST(LogicTest, NonContradiction) { ... } +``` + +could generate this report: + +``` +<?xml version="1.0" encoding="UTF-8"?> +<testsuites tests="3" failures="1" errors="0" time="35" name="AllTests"> + <testsuite name="MathTest" tests="2" failures="1"* errors="0" time="15"> + <testcase name="Addition" status="run" time="7" classname=""> + <failure message="Value of: add(1, 1)
 Actual: 3
Expected: 2" type=""/> + <failure message="Value of: add(1, -1)
 Actual: 1
Expected: 0" type=""/> + </testcase> + <testcase name="Subtraction" status="run" time="5" classname=""> + </testcase> + </testsuite> + <testsuite name="LogicTest" tests="1" failures="0" errors="0" time="5"> + <testcase name="NonContradiction" status="run" time="5" classname=""> + </testcase> + </testsuite> +</testsuites> +``` + +Things to note: + + * The `tests` attribute of a `<testsuites>` or `<testsuite>` element tells how many test functions the Google Test program or test case contains, while the `failures` attribute tells how many of them failed. + * The `time` attribute expresses the duration of the test, test case, or entire test program in milliseconds. + * Each `<failure>` element corresponds to a single failed Google Test assertion. + * Some JUnit concepts don't apply to Google Test, yet we have to conform to the DTD. Therefore you'll see some dummy elements and attributes in the report. You can safely ignore these parts. + +_Availability:_ Linux, Windows, Mac. + +## Controlling How Failures Are Reported ## + +### Turning Assertion Failures into Break-Points ### + +When running test programs under a debugger, it's very convenient if the +debugger can catch an assertion failure and automatically drop into interactive +mode. Google Test's _break-on-failure_ mode supports this behavior. + +To enable it, set the `GTEST_BREAK_ON_FAILURE` environment variable to a value +other than `0` . Alternatively, you can use the `--gtest_break_on_failure` +command line flag. + +_Availability:_ Linux, Windows, Mac. + +### Suppressing Pop-ups Caused by Exceptions ### + +On Windows, Google Test may be used with exceptions enabled. Even when +exceptions are disabled, an application can still throw structured exceptions +(SEH's). If a test throws an exception, by default Google Test doesn't try to +catch it. Instead, you'll see a pop-up dialog, at which point you can attach +the process to a debugger and easily find out what went wrong. + +However, if you don't want to see the pop-ups (for example, if you run the +tests in a batch job), set the `GTEST_CATCH_EXCEPTIONS` environment variable to +a non- `0` value, or use the `--gtest_catch_exceptions` flag. Google Test now +catches all test-thrown exceptions and logs them as failures. + +_Availability:_ Windows. `GTEST_CATCH_EXCEPTIONS` and +`--gtest_catch_exceptions` have no effect on Google Test's behavior on Linux or +Mac, even if exceptions are enabled. It is possible to add support for catching +exceptions on these platforms, but it is not implemented yet. + +### Letting Another Testing Framework Drive ### + +If you work on a project that has already been using another testing +framework and is not ready to completely switch to Google Test yet, +you can get much of Google Test's benefit by using its assertions in +your existing tests. Just change your `main()` function to look +like: + +``` +#include <gtest/gtest.h> + +int main(int argc, char** argv) { + ::testing::GTEST_FLAG(throw_on_failure) = true; + // Important: Google Test must be initialized. + ::testing::InitGoogleTest(&argc, argv); + + ... whatever your existing testing framework requires ... +} +``` + +With that, you can use Google Test assertions in addition to the +native assertions your testing framework provides, for example: + +``` +void TestFooDoesBar() { + Foo foo; + EXPECT_LE(foo.Bar(1), 100); // A Google Test assertion. + CPPUNIT_ASSERT(foo.IsEmpty()); // A native assertion. +} +``` + +If a Google Test assertion fails, it will print an error message and +throw an exception, which will be treated as a failure by your host +testing framework. If you compile your code with exceptions disabled, +a failed Google Test assertion will instead exit your program with a +non-zero code, which will also signal a test failure to your test +runner. + +If you don't write `::testing::GTEST_FLAG(throw_on_failure) = true;` in +your `main()`, you can alternatively enable this feature by specifying +the `--gtest_throw_on_failure` flag on the command-line or setting the +`GTEST_THROW_ON_FAILURE` environment variable to a non-zero value. + +_Availability:_ Linux, Windows, Mac; since v1.3.0. + +## Distributing Test Functions to Multiple Machines ## + +If you have more than one machine you can use to run a test program, +you might want to run the test functions in parallel and get the +result faster. We call this technique _sharding_, where each machine +is called a _shard_. + +Google Test is compatible with test sharding. To take advantage of +this feature, your test runner (not part of Google Test) needs to do +the following: + + 1. Allocate a number of machines (shards) to run the tests. + 1. On each shard, set the `GTEST_TOTAL_SHARDS` environment variable to the total number of shards. It must be the same for all shards. + 1. On each shard, set the `GTEST_SHARD_INDEX` environment variable to the index of the shard. Different shards must be assigned different indices, which must be in the range `[0, GTEST_TOTAL_SHARDS - 1]`. + 1. Run the same test program on all shards. When Google Test sees the above two environment variables, it will select a subset of the test functions to run. Across all shards, each test function in the program will be run exactly once. + 1. Wait for all shards to finish, then collect and report the results. + +Your project may have tests that were written without Google Test and +thus don't understand this protocol. In order for your test runner to +figure out which test supports sharding, it can set the environment +variable `GTEST_SHARD_STATUS_FILE` to a non-existent file path. If a +test program supports sharding, it will create this file to +acknowledge the fact (the actual contents of the file are not +important at this time; although we may stick some useful information +in it in the future.); otherwise it will not create it. + +Here's an example to make it clear. Suppose you have a test program +`foo_test` that contains the following 5 test functions: +``` +TEST(A, V) +TEST(A, W) +TEST(B, X) +TEST(B, Y) +TEST(B, Z) +``` +and you have 3 machines at your disposal. To run the test functions in +parallel, you would set `GTEST_TOTAL_SHARDS` to 3 on all machines, and +set `GTEST_SHARD_INDEX` to 0, 1, and 2 on the machines respectively. +Then you would run the same `foo_test` on each machine. + +Google Test reserves the right to change how the work is distributed +across the shards, but here's one possible scenario: + + * Machine #0 runs `A.V` and `B.X`. + * Machine #1 runs `A.W` and `B.Y`. + * Machine #2 runs `B.Z`. + +_Availability:_ Linux, Windows, Mac; since version 1.3.0. + +# Fusing Google Test Source Files # + +Google Test's implementation consists of ~30 files (excluding its own +tests). Sometimes you may want them to be packaged up in two files (a +`.h` and a `.cc`) instead, such that you can easily copy them to a new +machine and start hacking there. For this we provide an experimental +Python script `fuse_gtest_files.py` in the `scripts/` directory (since release 1.3.0). +Assuming you have Python 2.4 or above installed on your machine, just +go to that directory and run +``` +python fuse_gtest_files.py OUTPUT_DIR +``` + +and you should see an `OUTPUT_DIR` directory being created with files +`gtest/gtest.h` and `gtest/gtest-all.cc` in it. These files contain +everything you need to use Google Test. Just copy them to anywhere +you want and you are ready to write tests. You can use the +[scrpts/test/Makefile](../scripts/test/Makefile) +file as an example on how to compile your tests against them. + +# Where to Go from Here # + +Congratulations! You've now learned more advanced Google Test tools and are +ready to tackle more complex testing tasks. If you want to dive even deeper, you +can read the [FAQ](V1_5_FAQ.md). |